Flexel Ecofloor Underfloor Heating Mat - 200 W/m2 - Area to be Heated - 1.0m2 - 200W Output

Heating » Underfloor Heating » Tiles & Stone » Separates » Flexel Ecofloor Underfloor Heating Mat - 200 W/m2

Flexel Ecofloor Underfloor Heating Mat - 200 W/m2 - Area to be Heated - 1.0m2 - 200W Output (Item shown is Area to be Heated - 1.0m2 - 200W Output)

Code	Variation / Style	Price inc
LDTS200-1.0	Area to be Heated - 1.0m2 - 200W Output	£49.12
LDTS200-2.0	Area to be Heated - 2.0m2 - 400W Output	£82.25
LDTS200-3.0	Area to be Heated - 3.0m2 - 600W Output	£112.75
LDTS200-4.0	Area to be Heated - 4.0m2 - 800W Output	£138.52
LDTS200-5.0	Area to be Heated - 5.0m2 - 1000W Output	£170.63
LDTS200-6.0	Area to be Heated - 6.0m2 - 1200W Output	£184.64
LDTS200-7.0	Area to be Heated - 7.0m2 - 1400W Output	£208.92
LDTS200-8.0	Area to be Heated - 8.0m2 - 1600W Output	£229.47
LDTS200-9.0	Area to be Heated - 9.0m2 - 1800W Output	£251.40
LDTS200-10.0	Area to be Heated - 10.0m2 - 2000W Output	£321.59

You have not selected any items to add to your basket

All prices include VAT.

Flexel Ecofloor Underfloor Heating Mat - 200 W/m2
Flexel EcoFloor 200W/m² Underfloor Heating Mat

Combination of self-adhesive mesh with a heating cable pre-attached

Mat design enables fast installation and an even heat distribution across the whole floor

Mats are 500mm wide and available in a range of lengths

Mats have a twin conductor cable simplifying installation with a single 3m “cold tail” connection

Finished installation is controlled using an easy to use programmable thermostat

Also available in 150W/m² heat outputs suitable for internal applications including kitchens, bathrooms & living areas

This 200W/m² mat is recommended for use in conservatories or areas prone to high heat loss

Very simple to install by following the comprehensive instruction booklet included with each cable mat

Please Note: The final electrical connections should be made by a qualified electrician in accordance with the current wiring regulations

All installations require a 30mA RCD (residual current device) for safe operation

Rooms requiring more than two mats require connection to the thermostat via a standard junction box

It is recommended that consideration is given to floor insulation as an insulated floor will speed up heat up times and reduce running costs

For Suspended Floors:
When fitting Ecofloor to a timber sub-floor it is essential that you take the standard precautions to stabilise the floor and prevent floor movement. You must always over-board the timber floorboards or chipboard with a surface suitable for tiling. Flexel recommend Ecomax Insulated Tile Backer Board or primed 18mm WBP Plywood.
For Solid Floors:
For best performance it is recommended before fitting Ecofloor you fit a layer of Ecomax Insulated Tile Backer Board. This will minimise heat loss and ensure quicker heat-up times for the floor. Ecofloor can be laid directly onto an un-insulated floor, however this will slow heat-up times, increase running costs and is not recommended.

2.0m long x 0.50m wide

Flexel Ecofloor Underfloor Heating Mat - 200 W/m2 - Area to be Heated - 1.0m2 - 200W Output Specification
Internal Code: LDTS200-1.0