Satin Chrome **EMPTY** LED Dimmer Switch Plate - 1 Gang EMPTY

Satin Chrome **EMPTY** LED Dimmer Switch Plate

Part No: 7MPRO-170

Empty Plate and Knob

Part No: 7MPRO-171

Empty plate and 2 knobs

Part No: 7MPRO-172

Empty plate and 3 knobs

Part No: 7MPRO-173

Empty plate and 4 knobs

Part No: SN400M

Dims most types of LED loads


Acts as a 1 or 2 way switch but does not dim

Dimensions: 50x26x42mm

Part No: MPINT

Intermediate dummy module that DOES NOT dim. 


Other items in this range

Show 54 more products


Build your own bespoke LED and standard Brushed Dimmer Plate

  • Simply choose the plate and then select the dimming modules you require
  • If you would like it assembling please tell us configuration left to right in the comments box when checking out
  • Single plate dimensions: 86mm wide x 86mm high x 7mm deep
  • Double plate dimensions: 146mm wide x 86mm high x 7mm deep 
  • All switches can operate 1 or 2 way but you can only have 1 dimmer on any light fitting
  • If you have to 2 way switch a circuit only put a dimmer on one end, we also list a dummy dimmer which will facilitate this
  • Most dimmer plates will fit on a 25mm backbox but we always reccomend using a 35mm box so there is plenty of air


This website uses 'cookies' to give you the best, most relevant experience. Using this website means you’re Ok with this. You can change which cookies are set at any time - and find out more about them - by following this link (or by clicking the cookie link at the top of any page).

OK, I understand and accept