Flat Plate Brushed Satin Brass Finish Dimming 1 or 2 way lighting switches

  • Single Plate dimensions 87.5mm wide x 87.5mm high x 3mm deep
  • Double Plate dimensions 148.5mm wide x 87.5mm high x 3mm deep
  • Slim profile plate complete with integral gasket 
  • Requires minimum 35mm deep backbox (not incl) 35mm or 47mm recommended
  • Made from high quality ultra slim, premium grade material 
  • Compliant to all relevant British safety standard 
  • Supplied in retail blister with full fitting instructions 
  • Ideal upgrade to existing standard light switches around the home as long as there is enough depth in the backbox
  • All switches switch 1 or 2 way circuits
  • 15 year guarantee

Trailing edge dimmers with a 200W rating. Push on/push off control. For controlling mains lighting add up the wattages of the bulbs you wish to dim. GLS, 240v/12v Halogen with dimmable magnetic / electronic transformer: Min 10w - Max 200w 

LED dimmable lamp / LED dimmable driver: Min 5w - Max 150w

To operate with LED lamps, the lamp or driver must be compatible i.e. dimmable. This unit is not suitable for non-dimmable products. Check with lamp manufacturer for compatibility.


This website uses 'cookies' to give you the best, most relevant experience. Using this website means you’re Ok with this. You can change which cookies are set at any time - and find out more about them - by following this link (or by clicking the cookie link at the top of any page).

OK, I understand and accept