Screwless Matt Black Multi Grid Switch Plates - Black dimmer mounting kit

Screwless Matt Black Multi Grid Switch Plates

Part No: SCP20506BK

YOU WILL NEED TO ORDER 2 X SIN20400 YOKE MODULES WITH THIS PLATE (SEE BELOW)

£6.98
Part No: SCP20508BK

YOU WILL NEED TO ORDER 2 X SIN20400 YOKE MODULES WITH THIS PLATE (SEE BELOW)

£6.98
Part No: SIN20200

YOU WILL NEED THIS FOR 1 & 2 GANG PLATES

£1.48
Part No: SIN20400

THIS YOKE IS FOR USE WITH 3,4,6 & 8 GANG SWITCHES

£1.68
Part No: WA512

137mm x 137mm x 47mm deep

£11.98
Part No: GM050BK

YOU WILL NEED TO CHOOSE YOUR DIMMER MODULE AS WELL AS THIS

£2.48
Part No: SN400M

WILL SWITCH LED OR STANDARD LOAD

£8.98
Part No: DUMMY DIMMER

Acts as a 1 or 2 way switch but does not dim

£6.38
Part No: MPINT

Intermediate dummy module that DOES NOT dim

£12.98
Part No: GM2028BK

Only needed if light point can be switched from 3 or more positions

£6.08

Description

Definity screwless matt black grid plates for use with the GRIDPRO switch modules


First choose your empty plate and cover, then choose which switches you require. Each module takes up one gang unless stated.


  • Definity screwless empty insert and cover plate
  • Plate dimensions single 86mm wide x 86mm high x 4mm deep (approx)
  • Plate dimensions double 146mm wide x 86mm high x 4mm deep (approx)
  • Plate dimensions 6/8 gang 146mm wide x 146mm high x 4mm deep (approx)
  • Requires 35mm deep backbox (not incl) or 47mm if dimmer modules are used.
  • Click here to see more in the Screwless Matt Black range

Specification

This website uses 'cookies' to give you the best, most relevant experience. Using this website means you’re Ok with this. You can change which cookies are set at any time - and find out more about them - by following this link (or by clicking the cookie link at the top of any page).

OK, I understand and accept