IMPORTANT: THIS IS A BESPOKE CUT TO LENGTH PRODUCT AND IS NON-RETURNABLE
Single colour remote handset to work with receiver RF-Z1C-REC-TOP6
Switch/control & dim up to 4 zones together or independently
At least one receiver required per zone
12v 144w max load
24v 288w max load
3 Yr Guarantee
Will power up to 1250mm of 4.8w Tape
Will power up to 2500mm of 4.8w tape
Will power up to 3100mm of 4.8w tape
Will power up to 4100mm of 4.8w tape
Will power up to 10m of 4.8w Tape. This is the maximum available run on one piece of tape.
Dimmable driver is only required if you want to dim the tape from a wall dimmer, if you are using our controls normal drivers are fine.
1.5m extension cable with JB plug and socket to extend input cable if necessary
1 Required for each piece of LED strip
Splits 1 top connection to 4 ways
Easy to fit 12v LED strip on self adhesive flexible tape, bespoke cut to length in 50mm intervals and terminated ready to plug in to driver and go. If you are ordering more than 1 piece please put the lengths of each piece required in the comments box when checking out. Also you will need to order 1 termination and input cable per piece and relevant drivers.
See more products from Home Lighting Kitchen Lighting LED Strip Lights
Sorry, there are no related products for this item.
Get all the latest news, products and special customer offers in our monthly newsletter, delivered directly to your inbox. Sign-up now for FREE and you may cancel at any time.
This website uses 'cookies' to give you the best, most relevant experience. Using this website means you’re Ok with this. You can change which cookies are set at any time - and find out more about them - by following this link (or by clicking the cookie link at the top of any page).