Electric Underfloor Heating Mat 200W/m2 - 1m2 200w

Electric Underfloor Heating Mat 200W/m2

Part No: UWM200-1.0
2.0m long x 0.5m wide
£31.08
Part No: UWM200-1.5
3.0m long x 0.5m wide
£46.62
Part No: UWM200-2.0
4.0m long x 0.5m wide
£62.16
Part No: UWM200-2.5
5.0m long x 0.5m wide
£77.70
Part No: UWM200-3.0
6.0m long x 0.5m wide
£93.24
Part No: UWM200-3.5
7.0m long x 0.5m wide
£108.78
Part No: UWM200-4.0
8.0m long x 0.5m wide
£124.32
Part No: UWM200-4.5
4.5m long x 0.5m wide
£139.86
Part No: UWM200-5.0
10.0m long x 0.5m wide
£155.40
Part No: UWM200-6.0
12.0m long x 0.5m wide
£186.48
Part No: UWM200-7.0
14m long x 0.5m wide
£217.56
Part No: UWM200-8.0
16.0m long x 0.5m wide
£248.64
Part No: UWM200-9.0
18m Long x 0.5m Wide
£279.72
Part No: UWM200-10
20.0m long x 0.5m wide
£310.80
Part No: UW-TOUCH
16a Fully programmable touchscreen thermostat
7 Day programming with 6 events per day
3 operating modes - air, floor or air & floor
Floor sensor included (3m)

£50.40
Part No: UW-MAN
Simple on/offcontrol
Fits flush in a standard wall socket
Floor sensor included (3m)
 
£33.60

Description

Ultrawarm under floor heat matt 200W/m2 suitable for conservatory use giving rapid warm up.
  • Design enables fast installation and an even heat distribution across the whole floor
  • Mats sizes are regular metric sizes at 1.5m2 intervals up to 5m2 and then 1m2 intervals up to 10.0m2
  • Mats have a twin conductor cable simplifying installation with a single 3m “cold tail” connection
  • Finished installation is controlled using an easy to use programmable thermostat
  • This 200W/m2 mat is suitable for internal applications including kitchens, bathrooms & conservatories
  • Very simple to install by following the comprehensive instruction booklet included with each cable mat
  • Please Note: The final electrical connections should be made by a qualified electrician in accordance with the current wiring regulations
  • All installations require a 30mA RCD (residual current device) for safe operation
  • Rooms requiring more than two mats require connection to the thermostat via a standard junction box
  • It is recommended that consideration is given to floor insulation as an insulated floor will speed up heat up times and reduce running costs
    For Suspended Floors: . You must always over-board the timber floorboards or chipboard with a surface suitable for tiling.
  • Includes lifetime warranty
  • Fully self adhesive Mesh
  • Safe and tested beyond 2500V
  • Specification

    Article CodeUWM200-1.0

    This website uses 'cookies' to give you the best, most relevant experience. Using this website means you’re Ok with this. You can change which cookies are set at any time - and find out more about them - by following this link (or by clicking the cookie link at the top of any page).

    OK, I understand and accept