Sitemap

4" (100mm) Plastic Square Extractor Ventilation Flaps

• Square grill designed for extract ventilation
• Specially designed for wall mounting with gravity louvres
• Includes flange for connection to 100mm round ducting
• Easy screw fastening
• Dimensions 155mm x 155mm x 12mm deep (approx)
• Available in a choice of finish (see above)

4" (100mm) Plastic Cowl Extractor Fan Ventilation Outlet with Damper

• Square grill designed for extract ventilation
• Specially designed to stop draughts from closing the damper
• Includes spigot flange for connection to 100mm round ducting
• Easy screw fastening
• Dimensions 154mm x 154mm x 80mm projection (approx)
• Available in a choice of finish (see above)

4" (100mm), 5" 125mm and 6" 150mm fixed plastic square extractor fan vent covers in black finish

• Square grille designed for domestic extract ventilation
• Insect screen / fly mesh included
• Specially designed for wall or soffit mounting 
• Includes flange for connection to round ducting
• Easy screw fastening
• Dimensions: See individual sizes
• Removable blades or front grille for easy cleaning

4" (100mm), 5" 125mm and 6" 150mm fixed plastic square extractor fan vent covers in grey finish

• Square grille designed for domestic extract ventilation
• Insect screen / fly mesh included
• Specially designed for wall or soffit mounting 
• Includes flange for connection to round ducting
• Easy screw fastening
• Dimensions: See individual sizes
• Removable blades or front grille for easy cleaning

4" (100mm), 5" 125mm and 6" 150mm fixed plastic square extractor fan vent covers in terracotta finish

• Square grille designed for domestic extract ventilation
• Insect screen / fly mesh included
• Specially designed for wall or soffit mounting 
• Includes flange for connection to round ducting
• Easy screw fastening
• Dimensions: See individual sizes
• Removable blades or front grille for easy cleaning

4" (100mm), 5" 125mm and 6" 150mm gravity plastic flaps square extractor fan vent covers in black finish

• Square grille designed for domestic extract ventilation
• Specially designed for wall or soffit mounting 
• Includes flange for connection to round ducting
• Easy screw fastening
• Dimensions: See individual sizes
• Removable blades or front grille for easy cleaning

Fantasia Viper Ceiling Fan Radio Frequency Remote Control Kit with Light Dimmer

• Comprises handset and receiver unit
• Controls 3 fan speeds and light including dimming
• Receiver is wired into existing fan. Perfect if you require a high ceiling fan or you just want to eliminate long pull cords
• One complete remote control system required per fan
• Requires twin and earth cable to receiver
• 2 year warranty
• Please note: These controls do not switch the fan from forward to reverse. This must be done with the manual reverse switch on the fan itself

Fantasia Ceiling Fan Radio Frequency Remote Control Kit with Light Dimmer

• Comprises of a handset and receiver unit and requires twin and earth wiring (live, neutral and earth)
• NEW! Fantasia's M3 remote control system now offers a timer function with 2hr, 4hr and 8hr auto switch off
• Comes complete with wall mountable holder and battery
• Radio frequency remote control operates fan speeds and dims light
• Controls all 3 ceiling fan speeds and light on/off/dim. Can also be used on models without a light kit
• Comes with 2 year manufacturers warranty
• Receiver unit fits in ceiling fan bracket at ceiling level and is hidden by ceiling rose canopy
• Note: one remote control is required per fan

Fantasia Ceiling Fan Radio Frequency Remote Control Kit with Light Dimmer For Phoenix Fan Only

• Comprises of a handset and receiver unit and requires twin and earth wiring (live, neutral and earth)
• NEW! Fantasia's M3 remote control system now offers a timer function with 2hr, 4hr and 8hr auto switch off
• Comes complete with wall mountable holder and battery
• Radio frequency remote control operates fan speeds and dims light
• Controls all 3 ceiling fan speeds and light on/off/dim. Can also be used on models without a light kit
• Comes with 2 year manufacturers warranty
• Receiver unit fits in ceiling fan bracket at ceiling level and is hidden by ceiling rose canopy
• Note: one remote control is required per fan

Fantasia Viper Ceiling Fan Radio Frequency Remote Control Kit with Light Dimmer

• Comprises handset and receiver unit
• Controls 3 fan speeds and light including dimming
• Receiver is wired into existing fan. Perfect if you require a high ceiling fan or you just want to eliminate long pull cords
• One complete remote control system required per fan
• Requires twin and earth cable to receiver
• 2 year warranty
• Please note: These controls do not switch the fan from forward to reverse. This must be done with the manual reverse switch on the fan itself

Fantasia Ceiling Fan Radio Frequency Remote Control Kit with Light Dimmer

• Comprises of a handset and receiver unit and requires twin and earth wiring (live, neutral and earth)
• NEW! Fantasia's M3 remote control system now offers a timer function with 2hr, 4hr and 8hr auto switch off
• Comes complete with wall mountable holder and battery
• Radio frequency remote control operates fan speeds and dims light
• Controls all 3 ceiling fan speeds and light on/off/dim. Can also be used on models without a light kit
• Comes with 2 year manufacturers warranty
• Receiver unit fits in ceiling fan bracket at ceiling level and is hidden by ceiling rose canopy
• Note: one remote control is required per fan

Fantasia Ceiling Fan Radio Frequency Remote Control Kit with Light Dimmer For Phoenix Fan Only

• Comprises of a handset and receiver unit and requires twin and earth wiring (live, neutral and earth)
• NEW! Fantasia's M3 remote control system now offers a timer function with 2hr, 4hr and 8hr auto switch off
• Comes complete with wall mountable holder and battery
• Radio frequency remote control operates fan speeds and dims light
• Controls all 3 ceiling fan speeds and light on/off/dim. Can also be used on models without a light kit
• Comes with 2 year manufacturers warranty
• Receiver unit fits in ceiling fan bracket at ceiling level and is hidden by ceiling rose canopy
• Note: one remote control is required per fan

Ultraframe / Westinghouse / Angelo / Encon Concerto Ceiling Fan Shade - Spare Glass Shade

• Spare ceiling fan shade suitable for most Ultraframe and Westinghouse ceiling fans
• Neck size: 53mm
• Dimensions from top of shade to bottom : 120mm (approx)
• Dimensions at widest point : 110mm (approx)
• 6 bevelled clear glass panels with polished brass frame

Fantasia Amorie Opal Glass Ceiling Fan Shade - Spare Glass Shade

• Spare ceiling fan shade suitable for Fantasia Amorie light kit
• Neck size: 30mm
• Dimensions from top of shade to bottom : 70mm (approx)
• Dimensions at widest point : 55mm (approx)

Fantasia Stainless Steel Ceiling Fan Wall Control

• Fits into a standard 35mm single gang box
• Controls the 3 fan speeds only
• Maximum power rating is 200 watts
• Requires twin and earth cable between fan and control
• 2 year warranty

Neptune 54" Brushed Nickel Finish Ceiling Fan with Matt Silver Blades

• Diameter 54" (1320mm)
• Brushed Nickel Finish body
• Matt Silver blades
• 20W LED
• Complete with remote control
• 5 year waranty on motor, 2 year on remote kit
• Also available in white

Fantasia Viper Plus Stainless Steel Ceiling Fan with Light and Remote Control included.

• 44" (1120mm) or 54" (1370mm) diameter
• Stainless steel finish body and blade holders
• Maple blades as standard
• New reverse function on remote control
• Remote controls: Fan speeds H/M/Lo and on/off - Light on/off
• 20w LED 3000k warm white light fitting
• 6" (150mm) droprod supplied, others available - see associated products below
• Takes 27mm diameter drop rod
• Picture shows 54" version

Fantasia Zeta 52" (1320mm) Brushed Nickel Ceiling Fan with Walnut Blades

• Diameter 52" (1320mm)
• Brushed Nickel Body
• Walnut blades
• Blades are curved for improved air movement
• DC motor uses 60% less electricity than a standard ceiling fan
• Integral LED 18w 3000k warm white light
• Complete with remote control which operates reverse function and 6 forward and 6 reverse speeds plus light on/off
• As this fan comes with an integral remote control system it is not compatible with Fantasia wall controllers
• Flush mount only
• Zeta ceiling fan also available in Matt Black and Matt White finish

Fantasia Zeta 52" (1320mm) Matt White Ceiling Fan with Matt White Blades

• Diameter 52" (1320mm)
• Matt White Body
• Matt White blades
• Blades are curved for improved air movement
• DC motor uses 60% less electricity than a standard ceiling fan
• Integral LED 18w 3000k warm white light
• Complete with remote control which operates reverse function and 6 forward and 6 reverse speeds plus light on/off/dim
• As this fan comes with an integral remote control system it is not compatible with Fantasia wall controllers
• Flush mount only
• Zeta ceiling fan also available in Brushed Nickel and Matt Black finish

• 50" (127cm) Diameter
• Matt White body
• Includes 4 Matt White blades, can be installed with 2, 3 or 4 blades
• 1 x 18W Integrated LED for compact look
• Remote control included
• DC motor uses 60% less energy than a standard ceiling fan
• Remote controls 6 speeds forward/reverse, and lights on/off
• 15 year motor warranty and lights on/off
• 2 year remote control warranty
• 6" Drop Rod included, longer lengths available see related products

Fantasia Viper Plus White Ceiling Fan with Light and Remote Control included.

• 44" (1120mm) or 54" (1370mm) diameter
• White finish body and blade holders
• White Gloss blades as standard
• New reverse function on remote control
• Remote controls: Fan speeds H/M/Lo and on/off - Light on/off
• 20w LED 3000k warm white light fitting
• 6" (150mm) droprod supplied, others available - see associated products below
• Takes 27mm diameter drop rod
• Picture shows 54" version

Fantasia Viper Plus Stainless Steel Ceiling Fan with Light and Remote Control included.

• 44" (1120mm) or 54" (1370mm) diameter
• Stainless steel finish body and blade holders
• Dark oak blades as standard
• New reverse function on remote control
• Remote controls: Fan speeds H/M/Lo and on/off - Light on/off
• 20w LED 3000k warm white light fitting
• 6" (150mm) droprod supplied, others available - see associated products below
• Takes 27mm diameter drop rod
• Picture shows 54" version

Fantasia Viper Plus Antique Brass Ceiling Fan with Light and Remote Control included.

• 44" (1120mm) or 54" (1370mm) diameter
• Pewter finish body and blade holders
• Gloss black blades as standard
• New reverse function on remote control
• Remote controls: Fan speeds H/M/Lo and on/off - Light on/off
• 20w LED 3000k warm white light fitting
• 6" (150mm) droprod supplied, others available - see associated products below
• Takes 27mm diameter drop rod
• Picture shows 54" version

Fantasia Zeta 52" (1320mm) Brushed Nickel Ceiling Fan with Silver Blades

• Diameter 52" (1320mm)
• Brushed Nickel Body
• Silver blades
• Blades are curved for improved air movement
• DC motor uses 60% less electricity than a standard ceiling fan
• Integral LED 18w 3000k warm white light
• Complete with remote control which operates reverse function and 6 forward and 6 reverse speeds plus light on/off/dim
• As this fan comes with an integral remote control system it is not compatible with Fantasia wall controllers
• Flush mount only
• Zeta ceiling fan also available in Matt Black and Matt White finish

Fantasia Viper Plus Pewter (like black nickel) Ceiling Fan with Light and Remote Control included.

• 44" (1120mm) or 54" (1370mm) diameter
• Pewter finish body and blade holders
• Gloss black blades as standard
• New reverse function on remote control
• Remote controls: Fan speeds H/M/Lo and on/off - Light on/off
• 20w LED 3000k warm white light fitting
• 6" (150mm) droprod supplied, others available - see associated products below
• Takes 27mm diameter drop rod
• Picture shows 54" version

• 56" (144cm) Diameter, this is a very large fan, please check suitability before ordering
• Matt White body
• Includes 3 Matt White blades
• 1 x 18W Daylight white 4000k LED light built in to the bottom (light blank included if no lights required)
• Comes with 6" drop rod, longer available if required
• DC motor uses 60% less energy than a standard ceiling fan
• Remote controls 6 speeds forward/reverse, and lights on/off
• 15 year motor warranty and lights on/off
• 2 year remote control warranty
• 6" Drop Rod included, longer lengths available see related products

Fantasia islander industrial 52" ceiling fan in hammered black with walnut blades

• Diameter 56" (1320mm)
• Hammered black finish body
• 3 x Walnut blades made from 13 layers of timber
• Fan is not reversible
• Down rod only (12" supplied)
• Cannot be flush mounted
• Includes 3 speed wall control
• 10 year limited motor warranty

• 52" (132cm) or 42"(107cm) Diameter, this is a very large fan, please check suitability before ordering
• Matt White body
• Includes 5 Matt White blades
• 1 x 18W warm white 3000k LED light built in to the bottom (light blank included if no lights required)
• Comes with 6" drop rod, longer available if required
• Remote controls 3 fan speeds, and lights on/off
• Airflow: 5358 cu/ft minute
• 15 year motor warranty and lights on/off
• 2 year remote control warranty
• 6" Drop Rod included, longer lengths available see related products

• 52" (132cm) or 42"(107cm) Diameter, this is a very large fan, please check suitability before ordering
• Brushed Satin Nickel body
• Includes 5 Maple/Walnut reversible blades (pic shows maple)
• 1 x 18W warm white 3000k LED light built in to the bottom (light blank included if no lights required)
• Comes with 6" drop rod, longer available if required
• Remote controls 3 fan speeds, and lights on/off
• Airflow: 5358 cu/ft minute
• 15 year motor warranty and lights on/off
• 2 year remote control warranty
• 6" Drop Rod included, longer lengths available see related products

• 52" (132cm) or 42"(107cm) Diameter, this is a very large fan, please check suitability before ordering
• Natural Iron body
• Includes 5 Maple/Walnut reversible blades (pic shows walnut)
• 1 x 18W warm white 3000k LED light built in to the bottom (light blank included if no lights required)
• Comes with 6" drop rod, longer available if required
• Remote controls 3 fan speeds, and lights on/off
• Airflow: 5358 cu/ft minute
• 15 year motor warranty and lights on/off
• 2 year remote control warranty
• 6" Drop Rod included, longer lengths available see related products

• 50" (127cm) Diameter
• Natural Iron body
• Includes 4 Natural Iron finish blades, can be installed with 2, 3 or 4 blades
• Available with 10w or 18w LED light
• Remote control included
• DC motor uses 60% less energy than a standard ceiling fan
• Remote controls 6 speeds forward/reverse, and lights on/off
• 10 year motor warranty and lights on/off
• 2 year remote control warranty
• 6" Drop Rod included, longer lengths available see related products

• 54" (137cm) Diameter, this is a very large fan, please check suitability before ordering
• Oil rubbed bronze body and blades
• 1 x 20W LED light built in to the bottom
• Comes with 6" drop rod, longer available if required
• DC motor uses 60% less energy than a standard ceiling fan
• Power consumption only 35w on high speed
• Remote controls 6 speeds forward/reverse, and lights on/off/dim
• 10 year motor warranty
• 2 year remote control warranty
• 6" Drop Rod included, longer lengths available see related products

• 54" (137cm) Diameter, this is a very large fan, please check suitability before ordering
• Matt white body and blades
• 1 x 20W LED light built in to the bottom
• Comes with 6" drop rod, longer available if required
• DC motor uses 60% less energy than a standard ceiling fan
• Power consumption only 35w on high speed
• Remote controls 6 speeds forward/reverse, and lights on/off/dim
• 10 year motor warranty
• 2 year remote control warranty
• 6" Drop Rod included, longer lengths available see related products

A truly unique ceiling fan thats ideal where space is tight or you can not mount it central to the room. The fan revolves 360dg, but mounted to the ceiling.. See the video here

• 12" (30cm) Diameter
• Matt white body and blades
• Optional 360dg oscillation (Can be static)
• Must be mounted to a flat surface, not vaulted
• Only 31w on high speed
• Airflow of 970 cu ft per minute
• Rubberised blades for safety
• Remote controls 3 speeds, oscillation and timer
• 10 year motor warranty
• 2 year remote control warranty
• Drop Rod included, longer lengths available see related products

Unique blades gives great air movement for a small fan, 3200 cu/ft per min

• 40" (102cm) Diameter
• 18w LED light included, controlled by remote
• Remote controls 3 speeds, light on/off/dim
• Matt white body and blades
• Only 50w on high speed
• Airflow of 3200 cu ft per minute
• 10 year motor warranty
• 2 year remote control warranty
• Drop Rod included, longer lengths available see related products

• 52" (132cm) Diameter, this is a very large fan, please check suitability before ordering
• 44" (112cm) Diameter
• Brushed nickel body and vintage oak blades
• 1 x 15W LED light built in to the bottom that can be dimmed with the remote
• Airflow 5400 cu/ft per min
• Power consumption only 65w on high speed
• Remote controls 3 speeds forward/reverse, and lights on/off/dim, timer
• 10 year motor warranty
• 2 year remote control warranty
• 6" Drop Rod included, longer lengths available see related products

• 52" (132cm) Diameter, this is a very large fan, please check suitability before ordering
• 44" (112cm) Diameter
• Matt white body and blades
• 1 x 15W LED light built in to the bottom that can be dimmed with the remote
• Airflow 5400 cu/ft per min
• Power consumption only 65w on high speed
• Remote controls 3 speeds forward/reverse, and lights on/off/dim, timer
• 10 year motor warranty
• 2 year remote control warranty
• 6" Drop Rod included, longer lengths available see related products

Introducing the super wide Titan ceiling fan which is nearly 7' wide or 209cm.. It is probably most suited to commercial applications for heat recovery and cooling. Available with or without 18w LED light

• 82" (209cm) Diameter, this is a VERY large ceiling fan, please check suitability before ordering
• Brushed titanium finish body and ABS blades
• 1 x 20W LED light built in to the bottom
• Low energy DC motor
• Comes with 12" drop rod, longer available if required
• Power consumption only 45w on high speed
• Remote controls 6 speeds forward/reverse, and lights on/off
• 18w LED light gives 1500 Lumens output which is approximately 120-140w in old money
• 2 year warranty
• Also available in Linear version see here

Fantasia Capri 36" (910mm) Stainless Steel Ceiling Fan with Reversible Washed Oak or Matt Silver Blades

• Diameter 36" (910mm)
• Stainless Steel body
• Reversible Washed Oak or Matt Silver blades
• Belmont 3 light fitting
• 3 x 60W SES Lamps
• Independent pull cords operate 3 fan speeds
• Conversion kit required to fit a drop rod
• Can be upgraded to remote control operation
• 22mm diameter drop rod required when used with a conversion kit

Fantasia Mayfair Combi 42" (1070mm) Gloss White Ceiling Fan with Gloss White Blades

• Diameter 42" (1070mm)
• Gloss White body
• Gloss White blades
• Complete with Amorie light kit
• 3 x 60W G9 bulbs (included)
• Conversion kit required to fit a drop rod
• Requires a 22mm diameter drop rod when used with a conversion kit

Fantasia Capri 36" (910mm) White Ceiling Fan with Matt White Blades

• Diameter 36" (910mm)
• White body
• Matt White blades
• Belmont 3 light fitting
• 3 x 60W SES Lamps
• Independent pull cords operate 3 fan speeds
• Conversion kit required to fit a drop rod
• Can be upgraded to remote control operation
• 22mm diameter drop rod required when used with a conversion kit

Fantasia Capri Combi 36" (910mm) Gloss White and Stainless Steel Ceiling Fan with Matt White Blades

• Diameter 36" (910mm)
• Gloss White and Stainless Steel body
• Matt White blades
• Belmont 3 light fitting
• 3 x 60W SES Lamps
• Independent pull cords operate 3 fan speeds
• Conversion kit required to fit a drop rod
• Can be upgraded to remote control operation
• 22mm diameter drop rod required when used with a conversion kit

Fantasia Viper Plus Stainless Steel Ceiling Fan with Light and Remote Control included.

• 44" (1120mm) or 54" (1370mm) diameter
• Stainless steel finish body and blade holders
• Maple blades as standard
• New reverse function on remote control
• Remote controls: Fan speeds H/M/Lo and on/off - Light on/off
• 20w LED 3000k warm white light fitting
• 6" (150mm) droprod supplied, others available - see associated products below
• Takes 27mm diameter drop rod
• Picture shows 54" version

Fantasia Zeta 52" (1320mm) Brushed Nickel Ceiling Fan with Walnut Blades

• Diameter 52" (1320mm)
• Brushed Nickel Body
• Walnut blades
• Blades are curved for improved air movement
• DC motor uses 60% less electricity than a standard ceiling fan
• Integral LED 18w 3000k warm white light
• Complete with remote control which operates reverse function and 6 forward and 6 reverse speeds plus light on/off
• As this fan comes with an integral remote control system it is not compatible with Fantasia wall controllers
• Flush mount only
• Zeta ceiling fan also available in Matt Black and Matt White finish

Fantasia Zeta 52" (1320mm) Matt White Ceiling Fan with Matt White Blades

• Diameter 52" (1320mm)
• Matt White Body
• Matt White blades
• Blades are curved for improved air movement
• DC motor uses 60% less electricity than a standard ceiling fan
• Integral LED 18w 3000k warm white light
• Complete with remote control which operates reverse function and 6 forward and 6 reverse speeds plus light on/off/dim
• As this fan comes with an integral remote control system it is not compatible with Fantasia wall controllers
• Flush mount only
• Zeta ceiling fan also available in Brushed Nickel and Matt Black finish

• 50" (127cm) Diameter
• Matt White body
• Includes 4 Matt White blades, can be installed with 2, 3 or 4 blades
• 1 x 18W Integrated LED for compact look
• Remote control included
• DC motor uses 60% less energy than a standard ceiling fan
• Remote controls 6 speeds forward/reverse, and lights on/off
• 15 year motor warranty and lights on/off
• 2 year remote control warranty
• 6" Drop Rod included, longer lengths available see related products

Fantasia Viper Plus White Ceiling Fan with Light and Remote Control included.

• 44" (1120mm) or 54" (1370mm) diameter
• White finish body and blade holders
• White Gloss blades as standard
• New reverse function on remote control
• Remote controls: Fan speeds H/M/Lo and on/off - Light on/off
• 20w LED 3000k warm white light fitting
• 6" (150mm) droprod supplied, others available - see associated products below
• Takes 27mm diameter drop rod
• Picture shows 54" version

Fantasia Viper Plus Stainless Steel Ceiling Fan with Light and Remote Control included.

• 44" (1120mm) or 54" (1370mm) diameter
• Stainless steel finish body and blade holders
• Dark oak blades as standard
• New reverse function on remote control
• Remote controls: Fan speeds H/M/Lo and on/off - Light on/off
• 20w LED 3000k warm white light fitting
• 6" (150mm) droprod supplied, others available - see associated products below
• Takes 27mm diameter drop rod
• Picture shows 54" version

Fantasia Viper Plus Antique Brass Ceiling Fan with Light and Remote Control included.

• 44" (1120mm) or 54" (1370mm) diameter
• Pewter finish body and blade holders
• Gloss black blades as standard
• New reverse function on remote control
• Remote controls: Fan speeds H/M/Lo and on/off - Light on/off
• 20w LED 3000k warm white light fitting
• 6" (150mm) droprod supplied, others available - see associated products below
• Takes 27mm diameter drop rod
• Picture shows 54" version

• Diameter 42" (1070mm)
• Matt Black body
• 5 Matt Black blades
• Complete with Amorie light kit
• 3 x 60W G9 Lamps (included)
• Conversion kit required to fit a drop rod
• Requires a 22mm diameter drop rod when used with a conversion kit
• Modern styling to compliment any interior
• Flush mounted making it suitable for low ceilings (can be converted to drop rod style if required)
• Use in summer for cooling and in winter to re-circulate warm air
• Independent pull cords operate the 3 speeds of the fan and the light

• Diameter 42" (1070mm)
• White & Stainless Steel body
• 5 White blades
• Complete with Amorie light kit
• 3 x 60W G9 bulbs (included)
• Conversion kit required to fit a drop rod
• Requires a 22mm diameter drop rod when used with a conversion kit
• Modern styling to compliment any interior
• Flush mounted making it suitable for low ceilings (can be converted to drop rod style if required)
• Use in summer for cooling and in winter to re-circulate warm air
• Independent pull cords operate the 3 speeds of the fan and the light

Fantasia Zeta 52" (1320mm) Brushed Nickel Ceiling Fan with Silver Blades

• Diameter 52" (1320mm)
• Brushed Nickel Body
• Silver blades
• Blades are curved for improved air movement
• DC motor uses 60% less electricity than a standard ceiling fan
• Integral LED 18w 3000k warm white light
• Complete with remote control which operates reverse function and 6 forward and 6 reverse speeds plus light on/off/dim
• As this fan comes with an integral remote control system it is not compatible with Fantasia wall controllers
• Flush mount only
• Zeta ceiling fan also available in Matt Black and Matt White finish

Fantasia Stainless Steel Ceiling Fan Wall Control

• Fits into a standard 35mm single gang box
• Controls the 3 fan speeds only
• Maximum power rating is 200 watts
• Requires twin and earth cable between fan and control
• 2 year warranty

Fantasia Viper Plus Pewter (like black nickel) Ceiling Fan with Light and Remote Control included.

• 44" (1120mm) or 54" (1370mm) diameter
• Pewter finish body and blade holders
• Gloss black blades as standard
• New reverse function on remote control
• Remote controls: Fan speeds H/M/Lo and on/off - Light on/off
• 20w LED 3000k warm white light fitting
• 6" (150mm) droprod supplied, others available - see associated products below
• Takes 27mm diameter drop rod
• Picture shows 54" version

• 56" (144cm) Diameter, this is a very large fan, please check suitability before ordering
• Matt White body
• Includes 3 Matt White blades
• 1 x 18W Daylight white 4000k LED light built in to the bottom (light blank included if no lights required)
• Comes with 6" drop rod, longer available if required
• DC motor uses 60% less energy than a standard ceiling fan
• Remote controls 6 speeds forward/reverse, and lights on/off
• 15 year motor warranty and lights on/off
• 2 year remote control warranty
• 6" Drop Rod included, longer lengths available see related products

Fantasia islander industrial 52" ceiling fan in hammered black with walnut blades

• Diameter 56" (1320mm)
• Hammered black finish body
• 3 x Walnut blades made from 13 layers of timber
• Fan is not reversible
• Down rod only (12" supplied)
• Cannot be flush mounted
• Includes 3 speed wall control
• 10 year limited motor warranty

• 52" (132cm) or 42"(107cm) Diameter, this is a very large fan, please check suitability before ordering
• Matt White body
• Includes 5 Matt White blades
• 1 x 18W warm white 3000k LED light built in to the bottom (light blank included if no lights required)
• Comes with 6" drop rod, longer available if required
• Remote controls 3 fan speeds, and lights on/off
• Airflow: 5358 cu/ft minute
• 15 year motor warranty and lights on/off
• 2 year remote control warranty
• 6" Drop Rod included, longer lengths available see related products

• 52" (132cm) or 42"(107cm) Diameter, this is a very large fan, please check suitability before ordering
• Brushed Satin Nickel body
• Includes 5 Maple/Walnut reversible blades (pic shows maple)
• 1 x 18W warm white 3000k LED light built in to the bottom (light blank included if no lights required)
• Comes with 6" drop rod, longer available if required
• Remote controls 3 fan speeds, and lights on/off
• Airflow: 5358 cu/ft minute
• 15 year motor warranty and lights on/off
• 2 year remote control warranty
• 6" Drop Rod included, longer lengths available see related products

• 52" (132cm) or 42"(107cm) Diameter, this is a very large fan, please check suitability before ordering
• Natural Iron body
• Includes 5 Maple/Walnut reversible blades (pic shows walnut)
• 1 x 18W warm white 3000k LED light built in to the bottom (light blank included if no lights required)
• Comes with 6" drop rod, longer available if required
• Remote controls 3 fan speeds, and lights on/off
• Airflow: 5358 cu/ft minute
• 15 year motor warranty and lights on/off
• 2 year remote control warranty
• 6" Drop Rod included, longer lengths available see related products

Fantasia Viper Ceiling Fan Radio Frequency Remote Control Kit with Light Dimmer

• Comprises handset and receiver unit
• Controls 3 fan speeds and light including dimming
• Receiver is wired into existing fan. Perfect if you require a high ceiling fan or you just want to eliminate long pull cords
• One complete remote control system required per fan
• Requires twin and earth cable to receiver
• 2 year warranty
• Please note: These controls do not switch the fan from forward to reverse. This must be done with the manual reverse switch on the fan itself

Fantasia Ceiling Fan Radio Frequency Remote Control Kit with Light Dimmer

• Comprises of a handset and receiver unit and requires twin and earth wiring (live, neutral and earth)
• NEW! Fantasia's M3 remote control system now offers a timer function with 2hr, 4hr and 8hr auto switch off
• Comes complete with wall mountable holder and battery
• Radio frequency remote control operates fan speeds and dims light
• Controls all 3 ceiling fan speeds and light on/off/dim. Can also be used on models without a light kit
• Comes with 2 year manufacturers warranty
• Receiver unit fits in ceiling fan bracket at ceiling level and is hidden by ceiling rose canopy
• Note: one remote control is required per fan

• 50" (127cm) Diameter
• Natural Iron body
• Includes 4 Natural Iron finish blades, can be installed with 2, 3 or 4 blades
• Available with 10w or 18w LED light
• Remote control included
• DC motor uses 60% less energy than a standard ceiling fan
• Remote controls 6 speeds forward/reverse, and lights on/off
• 10 year motor warranty and lights on/off
• 2 year remote control warranty
• 6" Drop Rod included, longer lengths available see related products

Fantasia Ceiling Fan Radio Frequency Remote Control Kit with Light Dimmer For Phoenix Fan Only

• Comprises of a handset and receiver unit and requires twin and earth wiring (live, neutral and earth)
• NEW! Fantasia's M3 remote control system now offers a timer function with 2hr, 4hr and 8hr auto switch off
• Comes complete with wall mountable holder and battery
• Radio frequency remote control operates fan speeds and dims light
• Controls all 3 ceiling fan speeds and light on/off/dim. Can also be used on models without a light kit
• Comes with 2 year manufacturers warranty
• Receiver unit fits in ceiling fan bracket at ceiling level and is hidden by ceiling rose canopy
• Note: one remote control is required per fan

• 54" (137cm) Diameter, this is a very large fan, please check suitability before ordering
• Oil rubbed bronze body and blades
• 1 x 20W LED light built in to the bottom
• Comes with 6" drop rod, longer available if required
• DC motor uses 60% less energy than a standard ceiling fan
• Power consumption only 35w on high speed
• Remote controls 6 speeds forward/reverse, and lights on/off/dim
• 10 year motor warranty
• 2 year remote control warranty
• 6" Drop Rod included, longer lengths available see related products

• 54" (137cm) Diameter, this is a very large fan, please check suitability before ordering
• Matt white body and blades
• 1 x 20W LED light built in to the bottom
• Comes with 6" drop rod, longer available if required
• DC motor uses 60% less energy than a standard ceiling fan
• Power consumption only 35w on high speed
• Remote controls 6 speeds forward/reverse, and lights on/off/dim
• 10 year motor warranty
• 2 year remote control warranty
• 6" Drop Rod included, longer lengths available see related products

A truly unique ceiling fan thats ideal where space is tight or you can not mount it central to the room. The fan revolves 360dg, but mounted to the ceiling.. See the video here

• 12" (30cm) Diameter
• Matt white body and blades
• Optional 360dg oscillation (Can be static)
• Must be mounted to a flat surface, not vaulted
• Only 31w on high speed
• Airflow of 970 cu ft per minute
• Rubberised blades for safety
• Remote controls 3 speeds, oscillation and timer
• 10 year motor warranty
• 2 year remote control warranty
• Drop Rod included, longer lengths available see related products

Unique blades gives great air movement for a small fan, 3200 cu/ft per min

• 40" (102cm) Diameter
• 18w LED light included, controlled by remote
• Remote controls 3 speeds, light on/off/dim
• Matt white body and blades
• Only 50w on high speed
• Airflow of 3200 cu ft per minute
• 10 year motor warranty
• 2 year remote control warranty
• Drop Rod included, longer lengths available see related products

• 52" (132cm) Diameter, this is a very large fan, please check suitability before ordering
• 44" (112cm) Diameter
• Brushed nickel body and vintage oak blades
• 1 x 15W LED light built in to the bottom that can be dimmed with the remote
• Airflow 5400 cu/ft per min
• Power consumption only 65w on high speed
• Remote controls 3 speeds forward/reverse, and lights on/off/dim, timer
• 10 year motor warranty
• 2 year remote control warranty
• 6" Drop Rod included, longer lengths available see related products

• 52" (132cm) Diameter, this is a very large fan, please check suitability before ordering
• 44" (112cm) Diameter
• Matt white body and blades
• 1 x 15W LED light built in to the bottom that can be dimmed with the remote
• Airflow 5400 cu/ft per min
• Power consumption only 65w on high speed
• Remote controls 3 speeds forward/reverse, and lights on/off/dim, timer
• 10 year motor warranty
• 2 year remote control warranty
• 6" Drop Rod included, longer lengths available see related products

Introducing the super wide Titan ceiling fan which is nearly 7' wide or 209cm.. It is probably most suited to commercial applications for heat recovery and cooling. Available with or without 18w LED light

• 82" (209cm) Diameter, this is a VERY large ceiling fan, please check suitability before ordering
• Brushed titanium finish body and ABS blades
• 1 x 20W LED light built in to the bottom
• Low energy DC motor
• Comes with 12" drop rod, longer available if required
• Power consumption only 45w on high speed
• Remote controls 6 speeds forward/reverse, and lights on/off
• 18w LED light gives 1500 Lumens output which is approximately 120-140w in old money
• 2 year warranty
• Also available in Linear version see here

Introducing the super wide Titan ceiling fan which is 7' wide or 214cm.. It is probably most suited to commercial applications for heat recovery and cooling. Available with or without 18w LED light

• 82" (209cm) Diameter, this is a VERY large ceiling fan, please check suitability before ordering
• Brushed titanium finish body and aluminium blades
• 1 x 20W LED light built in to the bottom (if chosen with light)
• Low energy DC motor
• Comes with 12" drop rod, longer available if required
• Power consumption only 45w on high speed
• Remote controls 6 speeds forward/reverse, and lights on/off
• 18w LED light gives 1500 Lumens output which is approximately 120-140w in old money
• 2 year warranty
• Also available in Turbine version see here

Fantasia Stainless Steel Ceiling Fan Wall Control

• This control is for controlling the fan light only
• Fits into a standard 35mm single gang box
• Maximum power rating is 200 watts
• 2 year warranty

Fantasia Capri 36" (910mm) Stainless Steel Ceiling Fan with Reversible Washed Oak or Matt Silver Blades

• Diameter 36" (910mm)
• Stainless Steel body
• Reversible Washed Oak or Matt Silver blades
• Belmont 3 light fitting
• 3 x 60W SES Lamps
• Independent pull cords operate 3 fan speeds
• Conversion kit required to fit a drop rod
• Can be upgraded to remote control operation
• 22mm diameter drop rod required when used with a conversion kit

Fantasia Mayfair Combi 42" (1070mm) Gloss White Ceiling Fan with Gloss White Blades

• Diameter 42" (1070mm)
• Gloss White body
• Gloss White blades
• Complete with Amorie light kit
• 3 x 60W G9 bulbs (included)
• Conversion kit required to fit a drop rod
• Requires a 22mm diameter drop rod when used with a conversion kit

Moreno by Euro Fans all white ceiling fan with single 60w light, available in 42" and 36" versions. Offering great value for money with a 5 year warranty

• Diameter 42" (1070mm) or 36" (920mm)
• White finish body and blades
• Independant pull cords operate the 3 fan speeds and light on/off
• Single 60w SES light kit (lamp not included) Click here
• Dual mount can be flush mounted or drop rod style
• Longer drop rods available

Fantasia Capri Combi 36" (910mm) Gloss White and Stainless Steel Ceiling Fan with Matt White Blades

• Diameter 36" (910mm)
• Gloss White and Stainless Steel body
• Matt White blades
• Belmont 3 light fitting
• 3 x 60W SES Lamps
• Independent pull cords operate 3 fan speeds
• Conversion kit required to fit a drop rod
• Can be upgraded to remote control operation
• 22mm diameter drop rod required when used with a conversion kit

• Diameter 42" (1070mm)
• Matt Black body
• 5 Matt Black blades
• Complete with Amorie light kit
• 3 x 60W G9 Lamps (included)
• Conversion kit required to fit a drop rod
• Requires a 22mm diameter drop rod when used with a conversion kit
• Modern styling to compliment any interior
• Flush mounted making it suitable for low ceilings (can be converted to drop rod style if required)
• Use in summer for cooling and in winter to re-circulate warm air
• Independent pull cords operate the 3 speeds of the fan and the light

• Diameter 42" (1070mm)
• White & Stainless Steel body
• 5 White blades
• Complete with Amorie light kit
• 3 x 60W G9 bulbs (included)
• Conversion kit required to fit a drop rod
• Requires a 22mm diameter drop rod when used with a conversion kit
• Modern styling to compliment any interior
• Flush mounted making it suitable for low ceilings (can be converted to drop rod style if required)
• Use in summer for cooling and in winter to re-circulate warm air
• Independent pull cords operate the 3 speeds of the fan and the light

• 50" (127cm) Diameter
• Natural Iron body
• Includes 4 Natural Iron finish blades, can be installed with 2, 3 or 4 blades
• Available with 10w or 18w LED light
• Remote control included
• DC motor uses 60% less energy than a standard ceiling fan
• Remote controls 6 speeds forward/reverse, and lights on/off
• 10 year motor warranty and lights on/off
• 2 year remote control warranty
• 6" Drop Rod included, longer lengths available see related products

• 52" (132cm) Diameter, this is a very large fan, please check suitability before ordering
• 44" (112cm) Diameter
• Brushed nickel body and vintage oak blades
• 1 x 15W LED light built in to the bottom that can be dimmed with the remote
• Airflow 5400 cu/ft per min
• Power consumption only 65w on high speed
• Remote controls 3 speeds forward/reverse, and lights on/off/dim, timer
• 10 year motor warranty
• 2 year remote control warranty
• 6" Drop Rod included, longer lengths available see related products

• 52" (132cm) Diameter, this is a very large fan, please check suitability before ordering
• 44" (112cm) Diameter
• Matt white body and blades
• 1 x 15W LED light built in to the bottom that can be dimmed with the remote
• Airflow 5400 cu/ft per min
• Power consumption only 65w on high speed
• Remote controls 3 speeds forward/reverse, and lights on/off/dim, timer
• 10 year motor warranty
• 2 year remote control warranty
• 6" Drop Rod included, longer lengths available see related products

Montana by Euro Fans all white ceiling fan with three 60w lights, available in 42" and 36" versions. Offering great value for money with a 5 year warranty

• Diameter 42" (1070mm) or 36" (920mm)
• White finish body and blades
• Independant pull cords operate the 3 fan speeds and light on/off
• 3 Lighjt kit with 3 x 60w SES light kit (lamp not included) Click here
• Dual mount can be flush mounted or drop rod style
• Longer drop rods available

Breeze by Euro Fans all white ceiling fan with 22w integrated LED light and remote control. Offering great value for money with a 5 year warranty

• Diameter 44" (1120mm)
• Remote gives 5 speeds in forward and reverse and light on/off
• White finish body and white acrylic blades
• Independant pull cords operate the 3 fan speeds and light on/off
• Single 22w LED light kit in warm white 2700k giving 1540 lumens
• Longer drop rods available
• 5 Year warranty

Fantasia Capri 36" (910mm) White Ceiling Fan with Matt White Blades

• Diameter 36" (910mm)
• White body
• Matt White blades
• Belmont 3 light fitting
• 3 x 60W SES Lamps
• Independent pull cords operate 3 fan speeds
• Conversion kit required to fit a drop rod
• Can be upgraded to remote control operation
• 22mm diameter drop rod required when used with a conversion kit

TV Coaxial Aerial Plug for Coax Cables

• Coaxial plug (male) or coaxial socket (female) - see above
• Metal finish
• Each piece 100% inspected and tested before being released for sale
• 100% appearance and function test
• Sturdy build and construction

TV Aerial Coupler

• TV coupler available in Male-Male or Female-Female - see above
• Metal finish
• Each piece 100% inspected and tested before being released for sale
• 100% appearance and function test
• Sturdy build and construction

F-Type Satellite Plug

• Standard satellite plug
• F type
• Metal finish
• Each piece 100% inspected and tested before being released for sale
• 100% appearance and function test
• Sturdy build and construction

F-Type Satellite Coupler

• Standard satellite coupler
• F type
• Metal finish
• Each piece 100% inspected and tested before being released for sale
• 100% appearance and function test
• Sturdy build and construction

Deco Chrome 2 Gang Size 45 amp Double Pole 

• Plate dimensions 88mm wide x 146mm high x 8mm deep
• Requires 47mm deep backbox (not incl)
• Click here to see more in the Deco Polished Chrome range

Deco Polished Chrome 45A Double Pole Cooker Control Unit with 13A Socket

• Plate dimensions 146mm wide x 88mm high x 8mm deep
• Requires 47mm deep backbox (not incl)
• Click here to see more in the Deco Polished Chrome range

Click 20A Plug-in Flow Connector - CT101C

• All-in-one junction box and connection system
• Versatile easy connection system for fixing wiring applications
• 250V, 16A plug-in connector
• Large terminals with easy access
• Terminal screws supplied raised
• Easy lock and release mechanism
• Male: Max. 1.5mm² 3 core flex (c/w cable restraint)
• Female: Max. 3 x 2.5mm² flat twin & earth (with additional loop terminal)

16mm Single Galvanised Steel Backbox

• Dimensions 70mm wide x 70mm high x 16mm deep
• For flush mounting of lightswitches

25mm Double Galvanised Steel Backbox

• Dimensions 130mm wide x 70mm high x 25mm deep
• For flush mounting of lightswitches, double sockets, dimmers etc.

25mm Single Galvanised Steel Backbox

• Dimensions 70mm wide x 70mm high x 25mm deep
• For flush mounting of lightswitches, single sockets, fused spurs, dimmers etc.

47mm Double Galvanised Steel Backbox

• Dimensions 130mm wide x 70mm high x 47mm deep
• For flush mounting of cooker switches, 45A DP shower switches and shaver sockets etc.

47mm Single Galvanised Steel Backbox

• Dimensions 70mm wide x 70mm high x 47mm deep
• For flush mounting of 45A double pole switches etc.

35mm Single Galvanised Steel Backbox

• Dimensions 70mm wide x 70mm high x 35mm deep
• For flush mounting of single sockets, fused spurs, dimmers etc.

35mm Double Galvanised Steel Backbox

• Dimensions 130mm wide x 70mm high x 35mm deep
• For flush mounting of flat plate double sockets, dimmers etc.

35mm Dual Accessory Galvanised Steel Backbox

• Dimensions 160mm wide x 70mm high x 35mm deep
• For flush mounting of 2 single size accessories such as light dimmers, fused spurs, single sockets etc.

Polished Chrome Decorative 2 Gang Twin Patress Backbox

• Double pattress backbox
• Chrome and Brass boxes are plastic with metallic look coating
• Smarten up surface mount switches and sockets by replacing your existing box with this decorative version
• Available in Polished Chrome, Polished Brass and Brushed Steel effect
• Complete with white surface mount box
• Maximum box depth 32mm

Polished Chrome Decorative Surface Mounted 1 Gang Patress Backbox

• Single pattress backbox
• Chrome and Brass boxes are plastic with metallic look coating
• Smarten up surface mount switches and sockets by replacing your existing box with this decorative version
• Available in Polished Chrome, Polished Brass and Brushed Steel effect
• Complete with white surface mount box
• Maximum box depth 28mm

1 + 2 Dual Accessory Galvanised Steel Backbox - 35mm Deep

• 35mm deep 1 + 2 dual accessory backbox
• For flush mounting of 1 x double and 1 x single size accessories such as light dimmers, fused spurs, sockets etc.

35mm Dual Accessory Galvanised Steel Backbox - Decorative Plate Only

• 35mm deep dual accessory backbox for decorative plates only
• For flush mounting of 2 single size accessories such as light dimmers, fused spurs, single sockets etc.

1 + 2 Dual Accessory Galvanised Steel Backbox - 35mm Deep Decorative Plate Only

• 35mm deep 1 + 2 dual accessory backbox for decorative plates only where larger spacing is required
• For flush mounting of 1 x double and 1 x single size accessories such as light dimmers, fused spurs, sockets etc.

FlameGuard 35mm Single Metal Backbox

• 35mm metal dry lining box
• Dimensions 72mm wide x 72mm high x 35mm deep
• For flush mounting of single sockets, fused spurs, dimmers etc.
• Simple and quick to install
• Unique spring loaded lugs
• Earth terminal fitted
• With potential fire temperatures in excess of 1000°C, the use of metal in the FlameGuard design helps maintain its position within the wall until the wall loses its structural integrity
• Fire tested up to 90 minutes with the capability of the boxes being mounted back to back
• Conform to both fire and acoustic BS EN standards. Fire BS EN 1363-1: 1999 and BS EN 1364-1: 1999

FlameGuard 35mm Double Metal Backbox

• 35mm metal dry lining box
• Dimensions 132mm wide x 72mm high x 35mm deep
• For flush mounting of double sockets, dimmers etc.
• Simple and quick to install
• Unique spring loaded lugs
• Earth terminal fitted
• With potential fire temperatures in excess of 1000°C, the use of metal in the FlameGuard design helps maintain its position within the wall until the wall loses its structural integrity
• Fire tested up to 90 minutes with the capability of the boxes being mounted back to back
• Conform to both fire and acoustic BS EN standards. Fire BS EN 1363-1: 1999 and BS EN 1364-1: 1999

FlameGuard 47mm Single Metal Backbox

• 47mm metal dry lining box
• Dimensions 72mm wide x 72mm high x 47mm deep
• For flush mounting of 45A DP switches etc.
• Simple and quick to install
• Unique spring loaded lugs
• Earth terminal fitted
• With potential fire temperatures in excess of 1000°C, the use of metal in the FlameGuard design helps maintain its position within the wall until the wall loses its structural integrity
• Fire tested up to 90 minutes with the capability of the boxes being mounted back to back
• Conform to both fire and acoustic BS EN standards. Fire BS EN 1363-1: 1999 and BS EN 1364-1: 1999

FlameGuard 47mm Double Metal Backbox

• 47mm metal dry lining box
• Dimensions 132mm wide x 72mm high x 47mm deep
• For flush mounting of 45A DP switches, shaver sockets etc.
• Simple and quick to install
• Unique spring loaded lugs
• Earth terminal fitted
• With potential fire temperatures in excess of 1000°C, the use of metal in the FlameGuard design helps maintain its position within the wall until the wall loses its structural integrity
• Fire tested up to 90 minutes with the capability of the boxes being mounted back to back
• Conform to both fire and acoustic BS EN standards. Fire BS EN 1363-1: 1999 and BS EN 1364-1: 1999

Mini Grid 47mm Deep Multi-Tier Galvanised Backbox for use with 2 Tier Plates

• Galvanised steel backbox for flush mounting of Mini Grid 2 tier plates
• Dimensions 137mm wide x 137mm high x 47mm deep

Mini Grid 47mm Deep Multi-Tier Galvanised Backbox for use with 3 Tier Plates

• Galvanised steel backbox for flush mounting of Mini Grid 3 tier plates
• Dimensions 137mm wide x 197mm high x 47mm deep

Mini Grid 25mm Deep Architrave Backbox for use with 1 Gang Architrave Plate

• Backbox for flush mounting of Mini Grid single aperture architrave plates
• Dimensions 33mm wide x 86mm high x 25mm deep

Mini Grid 25mm Deep Architrave Backbox for use with 2 Gang Architrave Plate

• Backbox for flush mounting of Mini Grid twin aperture architrave plates
• Dimensions 33mm wide x 147mm high x 25mm deep

 2 Gang Matt Black Double Surface Mounted Decorative Twin Backbox 

• Brushed Steel box is made of steel, matt black is steel that is powder coated
• Smarten up surface mount switches and sockets by replacing your existing box with this decorative version
• Available in Matt Black, Polished Chrome, Polished Brass and Brushed Steel effect
• Complete with white surface mount box
• Maximum internal box depth will accept 28mm
• External dimensions are 152mm wide x 93mm high x 35mm deep

1 Gang Single Patress Surface Mounted Metal Decorative Backbox

• Single pattress backbox
• Brushed Steel box is steel, Matt Black box is steel powder coated, Chrome and Brass boxes are plastic with metallic look coating
• Smarten up surface mount switches and sockets by replacing your existing box with this decorative version
• Available in Polished Chrome, Polished Brass and Brushed Steel effect
• Complete with white surface mount box
• Maximum internal box depth will accept 28mm
• External dimensions are 93mm x 93mm x 35mm deep

2 Gang Double Socket Surface Mounted Decorative Twin Patress Backbox

• Double pattress backbox
• Brushed Steel box is made of steel, matt black is steel that is powder coated
• Smarten up surface mount switches and sockets by replacing your existing box with this decorative version
• Available in Matt Black, Polished Chrome, Polished Brass and Brushed Steel effect
• Complete with white surface mount box
• Maximum internal box depth will accept 28mm
• External dimensions are 152mm wide x 93mm high x 35mm deep

1 Gang Matt Black Single Pattress Surface Mounted Decorative Backbox

• Single pattress backbox
• Brushed Steel box is steel, Matt Black box is steel powder coated, Chrome and Brass boxes are plastic with metallic look coating
• Smarten up surface mount switches and sockets by replacing your existing box with this decorative version
• Available in Polished Chrome, Polished Brass and Brushed Steel effect
• Complete with white surface mount box
• Maximum internal box depth will accept 28mm
• External dimensions are 93mm x 93mm x 35mm deep

2 Gang Decorative Twin Surface Mounted Patress Backbox

• Chrome and Brass boxes are plastic with metallic look coating
• Smarten up surface mount switches and sockets by replacing your existing box with this decorative version
• Available in Polished Chrome or Polished Brass 
• Complete with white surface mount box
• Maximum box depth 32mm

Polished Brass 1 Gang Decorative Surface Mounted Patress Backbox

• Chrome and Brass boxes are plastic with metallic look coating
• Smarten up surface mount switches and sockets by replacing your existing box with this decorative version
• Available in Polished Chrome, Polished Brass and Brushed Steel effect
• Complete with white surface mount box
• Maximum box depth 28mm

1 Gang Antique Bronze Single Pattress Surface Mounted Decorative Backbox

• Single pattress backbox
• Antique bronze box is steel
• Smarten up surface mount switches and sockets by replacing your existing box with this decorative version
• Available in Polished Chrome, Polished Brass and Brushed Steel effect and Matt Black
• Complete with white surface mount box
• Maximum internal box depth will accept 28mm
• External dimensions are 93mm x 93mm x 35mm deep

 2 Gang Antique Bronze Double Surface Mounted Decorative Twin Backbox 

• Antique bronze box is made of steel, matt black is steel that is powder coated
• Smarten up surface mount switches and sockets by replacing your existing box with this decorative version
• Available in Matt Black, Polished Chrome, Polished Brass and Brushed Steel effect
• Complete with white surface mount box
• Maximum internal box depth will accept 28mm
• External dimensions are 152mm wide x 93mm high x 35mm deep

1 Gang Matt Black Single Pattress Surface Mounted Decorative Backbox

• Single pattress backbox designed to be used with Knightsbridge screwless switches & sockets range
• Boxes are made of Polycarbonate plastic
• Smarten up surface mount switches and sockets by replacing your existing box with this decorative version
• We have other boxes available  in Polished Chrome, Polished Brass, Brushed Steel effect and Matt Black here
• External dimensions are 92mm x 92mm x 34mm deep

1 Gang Matt White Single Pattress Surface Mounted Decorative Backbox

• Single pattress backbox designed to be used with Knightsbridge screwless switches & sockets range
• Boxes are made of Polycarbonate plastic
• Smarten up surface mount switches and sockets by replacing your existing box with this decorative version
• We have other boxes available  in Polished Chrome, Polished Brass, Brushed Steel effect and Matt Black here
• External dimensions are 92mm x 92mm x 34mm deep

1 Gang Matt Grey Single Pattress Surface Mounted Decorative Backbox

• Single pattress backbox designed to be used with Knightsbridge screwless switches & sockets range
• Boxes are made of Polycarbonate plastic
• Smarten up surface mount switches and sockets by replacing your existing box with this decorative version
• We have other boxes available  in Polished Chrome, Polished Brass, Brushed Steel effect and Matt Black here
• External dimensions are 92mm x 92mm x 34mm deep

1 Gang Polished Chrome Single Pattress Surface Mounted Decorative Backbox

• Single pattress backbox designed to be used with Knightsbridge screwless switches & sockets range
• Boxes are made of Polycarbonate plastic
• Smarten up surface mount switches and sockets by replacing your existing box with this decorative version
• We have other boxes available  in Polished Chrome, Polished Brass, Brushed Steel effect and Matt Black here
• External dimensions are 92mm x 92mm x 34mm deep 

1 Gang Brushed Chrome Single Pattress Surface Mounted Decorative Backbox

• Single pattress backbox designed to be used with Knightsbridge screwless switches & sockets range
• Boxes are made of Polycarbonate plastic
• Smarten up surface mount switches and sockets by replacing your existing box with this decorative version
• We have other boxes available  in Polished Chrome, Polished Brass, Brushed Steel effect and Matt Black here
• External dimensions are 92mm x 92mm x 34mm deep

Suitable for use with 2G Screwless Products ..i.e. SFR9000BCG

Suitable for use with 2G Screwless Products ..i.e. SFR9000MBB

Suitable for use with 2G Screwless Products ..i.e. SFR9000BC

Suitable for use with 2G Screwless Products ..i.e. SFR9000MW

19mm x 33m PVC Insulation Tape

• Flame-retardant and self-extinguishing
• BS 3924

3.5mm x 50mm Long Plug Socket Fixing Screw Black Nickel, Brass & Chrome

• Suitable for fixing sockets, switches etc.
• 50mm long screw with 3.5mm thread
• Pan head

12 Way Polythene Connector Strip

• Clear polythene strip
• Available in 5A, 15A, 30A and 60A (see above for pricing)

Chocbox Connection Box

• Connection box for housing terminal strips
• Suitable for 2 - 30A terminal strips
• Dimensions: Internal - 70mm x 38mm x 22mm, External (overall) - 110mm x 50mm x 28mm
• IP20 rated
• Complies with cable retention and glow wire
• EN60598-1, BS 4533-1990
• Registered design

13A 1 Gang Single Extension Lead in White

• 1 gang single socket
• Available with choice of cable length (see above for pricing)
• Picture shows extension lead with 3m cable

13A 2 Gang Double Socket White Extension Lead

• 2 gang double socket
• Available with choice of cable length (see above for pricing)
• Picture shows extension lead with 2m cable

13A 4 Gang White Extension Lead

• 4 gang unswitched sockets
• Available with choice of cable length (see above for pricing)
• Picture shows extension lead with 2m cable

13A 6 Gang White Extension Lead 

• 6 gang unswitched sockets 
• Available with choice of cable length (see above for pricing)
• Picture shows extension lead with 2m cable

13A 4 Gang White Extension Lead with Neon

• 4 gang sockets
• Available with fuse or switch (see above for prices)
• 2m cable
• White finish

13A 6 Gang White Switched Extension Lead

• 13A 6 gang extension
• Switched
• 2m cable
• White finish

13A 4 Gang Anti-Surge and Anti-Spike Extension Lead - White

• 13 Amp 4 gang extension lead
• Anti-surge and anti-spike
• 2m cable
• White finish

13A 6 Gang Anti-Surge and Anti-Spike Extension Lead - White

• 13 Amp 6 gang extension lead
• Anti-surge and anti-spike
• 2m cable
• White finish
• Product may differ slightly from model shown

Waterproof and Weatherproof Black Cable Connector

• IP68 Safety weatherproof cable connector
• For joining and repairing outdoor cables up to 3 core 1.5mm
• Can be submerged in water to depths of 20m for up to 30mins
• IP68 rated at 2 bar
• Maximum current : 16 Amps
• Maximum Voltage: 250v
• Minimum cable diameter : 5mm
• Maximum cable diameter : 9mm
• Dimensions : 37.5mm Wide x 115mm Long
• Suitable for round cable - 0.75mm2 - 1.5mm2

Ideal For controlling multiple devices, automate appliances plugged in to go on/off at different time shut down all devices whilst away from home.

• Control up to 3 appliances, and the USB charging block from your smartphone or tablet via the SmartKnight app at home or away.
• Fully compatible with Amazon Alexa or Google Assistant.
• 3 power outlets, a Quad USB charger (5V DC 2.4A shared) and a 1.5m cable
• Set up a schedules using the timer function for things to switch on and off
• Max Load 2300W Total
• 2 year warranty
• 230V, 10A
• Wi-Fi Connectivity IEEE 802 11 b/g/n (2.4Ghz only)

Slim Black Nickel Finish 13A 2 Gang DP Double Switched Socket

• Plate dimensions 146mm wide x 86mm high x 5mm deep
• Slim profile back
• Requires 25mm deep backbox (not incl)
• Click here to see more in the 5mm Slimline Black Nickel range

Slim Black Nickel Finish Push On/Off No De-Rating Dimmer Switch

• Plate dimensions 86mm wide x 86mm high x 5mm deep
• Plate dimensions 146mm wide x 86mm high x 5mm deep
• Suitable for control of quality dimmable electronic transformers, toroidal transformers and tungsten lamps WITHOUT de-rating
• For use with resistive and inductive loads
• Integrated over-temperature protection fuse
• Smooth dimming operation from 0-100% light output
• Requires 25mm deep backbox (not incl)
• Click here to see more in the 5mm Slimline Black Nickel range

Screwless Black Nickel Finish Light Switch

• Single Plate dimensions 86mm wide x 86mm high x 6mm deep
• Double Plate dimensions 146mm wide x 86mm high x 6mm deep
• Slim profile back
• Metal rockers
• Requires 16mm or 25mm deep backbox (not incl)
• Click here to see more in the 5mm Slimline Matt Black range

Screwless Black Nickel Finish 13A DP Double Switched Socket

• Double Plate dimensions 148.5mm wide x 87.5mm high x 3mm deep
• Slim profile plate complete with integral gasket 
• Requires 25mm deep backbox (not incl)
• Made from high quality ultra slim, premium grade material 
• Compliant to all relevant British safety standard 
• Supplied in retail blister with full fitting instructions 
• Ideal upgrade to existing double switched sockets around the home 
• 15 year guarantee

Screwless Black Nickel Finish Dimming 1 or 2 way lighting switches

• Single Plate dimensions 87.5mm wide x 87.5mm high x 3mm deep

• Double Plate dimensions 148.5mm wide x 87.5mm high x 3mm deep
• Slim profile plate complete with integral gasket 
• Requires minimum 25mm deep backbox (not incl) 35mm reccomended
• Made from high quality ultra slim, premium grade material 
• Compliant to all relevant British safety standard 
• Supplied in retail blister with full fitting instructions 
• Ideal upgrade to existing standard light switches around the home as long as there is enough depth in the backbox
• All switches switch 1 or 2 way circuits
• 15 year guarantee

Trailing edge dimmers with a 200W rating. Push on/push off control. For controlling mains lighting add up the wattages of the bulbs you wish to dim. GLS, 240v/12v Halogen with dimmable magnetic / electronic transformer: Min 10w - Max 200w 

LED dimmable lamp / LED dimmable driver: Min 5w - Max 150w

To operate with LED lamps, the the lamp or driver must be compatible i.e. dimmable. This unit is not suitable for non-dimmable products. Check with lamp manufacturer for compatibility.

Deco Black Nickel 13A Double Pole Ingot Switched Socket

• Plate dimensions: 2 gang 146mm wide x 86mm high x 7mm deep
• 7mm depth plate for a sleek look
• Soft edge metal rockers for a quality finish
• 5 Year no quibble guarantee
• Ingot switches match plate finish
• Interchangeable modules on light switches
• Twin earth terminals
• Requires 25mm deep backbox (not incl)
• Click here to see more in the 7M Black Nickel range

Black Nickle 10A Lighting Switches 1 or 2 Way Switching

• Cover Plate dimensions: 1 gang 86mm wide x 86mm high x 7mm deep
• 7mm depth plate for a sleek look
• Soft edge metal rockers for a quality finish
• 5 Year no quibble guarantee
• Ingot switches match plate finish
• Interchangeable modules on light switches
• 10A X Rated for fluorescent or inductive loads
• Requires 25mm deep backbox (not incl)
• Click here to see more in the 7M Black Nickel range

Black Nickle Dimming Light Switches

• Cover Plate dimensions: 1 gang 86mm wide x 86mm high x 7mm deep
• Cover Plate dimensions: 2 gang 146mm wide x 86mm high x 7mm deep
• Suitable for the control of quality electronic transformers and tungsten lamps
• NOT suitable for dimming LED lamps and fittings
• Smooth dimming operation from 0-100% light output
• 3 Year guarantee
• Can be switched 1 way or 2 way
• Requires 25mm deep backbox minimum(not incl), but we reccomend 35mm for air space
• Click here to see more in the 7M Black Nickel range

110V 16A Industrial Plug 2P+E

• Diameter 53mm
• Length 112mm
• 1 year warranty
• IP44

110V 16A Connector 2P+E

• Diameter
• Length
• 1 Year Warranty
• IP44

110V 16A 3 Way Industrial Splitter 2P+E

• Height 73mm
• Width  213mm
• Length 222mm
• IP44
• 1 Year Warranty

240V 16A Connector 2P+E

• Diameter
• Length
• 1 Year Warranty
• IP44

20A Junction Box with 4 Selective Entry Points

• 80mm diameter x 30mm deep
• For use with lighting circuits

30A Junction Box with 4 Selective Entry Points

• 90mm diameter x 33mm deep
• For use with ring main circuits etc.

20A Junction Box with 4 Selective Entry Points

• 6 terminals
• 86mm diameter x 26mm deep
• For use with lighting circuits

20A Junction Box with 4 Selective Entry Points

• 58mm diameter x 22mm deep
• Ideal for use with LOW VOLTAGE lighting

100A Double Pole Tails Connector Box for Connection of Live and Neutral Meter Tails

• Dimensions 105mm long x 65mm wide x 56mm deep
• 5 x 35mm² capacity x2
• 100A Rating

IP66 Outdoor Weatherproof Electrical Connector Box

• Dimensions 85mm x 85mm x 45mm deep
• 2 x 20mm threaded entries on each side
• 2 x membrane entries on each side
• Off White / Light Grey finish
• Fast easy fixing kit included

100A Single Pole Tails Connector Box for Connection of Live and Neutral Meter Tails

• Dimensions 65mm long x 48mm wide x 34mm deep
• 5 x 35mm² capacity
• 100A Rating

60A Junction Box - 3 Terminal

• Heavy duty junction box
• 60A - 3 terminal
• Dimensions 150mm long x 90mm wide x 35mm deep
• Cable capacities for each side : 1 x 25mm² or 1 x 16mm² or 2 x 10mm² or 3 x 6mm²
• Brown

Chocbox Connection Box

• Connection box for housing terminal strips
• Suitable for 2 - 30A terminal strips
• Dimensions: Internal - 70mm x 38mm x 22mm, External (overall) - 110mm x 50mm x 28mm
• IP20 rated
• Complies with cable retention and glow wire
• EN60598-1, BS 4533-1990
• Registered design

16A Plug-in Flow Connector 

• All-in-one junction box and connection system
• Versatile easy connection system for fixing wiring applications
• 250V, 16A plug-in connector
• 4 terminals for loop-in on male
• Large terminals with easy access
• Terminal screws supplied raised
• Easy lock and release mechanism
• Male: Max. 1.5mm² 3 core flex (c/w cable restraint)
• Female: Max. 3 x 2.5mm² flat twin & earth (with additional loop terminal)

Waterproof and Weatherproof Black Cable Connector

• IP68 Safety weatherproof cable connector
• For joining and repairing outdoor cables up to 3 core 1.5mm
• Can be submerged in water to depths of 20m for up to 30mins
• IP68 rated at 2 bar
• Maximum current : 16 Amps
• Maximum Voltage: 250v
• Minimum cable diameter : 5mm
• Maximum cable diameter : 9mm
• Dimensions : 37.5mm Wide x 115mm Long
• Suitable for round cable - 0.75mm2 - 1.5mm2

Pop Up Socket Powerdock with 3 x UK Plug Sockets and 2 x USB Charger Sockets

• Pop-up socket for use in kitchen units or office workstations
• Satin Silver Plastic top with Aluminium housing
• 3 x 240v UK plug sockets
• 2 x USB power sockets @ 500mA
• Neatly slots away in its fully retracted position
• No wiring necessary
• Easy to install
• 2m pre-wired cable
• Isolator switch included with neon indicator
• Cut out : 102-105mm diameter
• Minimum 350mm clearance beneath worktop
• Installation and operating instructions supplied with product
• IP20
• 3 Year Warranty
• Please Note: Each socket is no longer individually fused as per image - fused at plug only. Awaiting new image.

Matt Black Pop Up Powerdock Socket with 3 x UK Plug Sockets and 2 x USB Charger Sockets

• Pop-up socket for use in kitchen units or office workstations
• Matt Black top with Aluminium housing
• 3 x 240v UK plug sockets
• 2 x USB power sockets @ 500mA
• Neatly slots away in its fully retracted position
• No wiring necessary
• Easy to install
• 2m pre-wired cable
• Isolator switch included with neon indicator
• Cut out : 102-105mm diameter
• Minimum 350mm clearance beneath worktop
• Installation and operating instructions supplied with product
• IP20
• 3 Year Warranty
• Please Note: Each socket is no longer individually fused as per image - fused at plug only. Awaiting new image.

Pop Up Socket with 3 x UK Plug Sockets and 2 x USB Charger Sockets

• For use in kitchen units or office desk workstations
• Brushed Steel lid with Silver plastic rim
• 3 x 240v UK plug sockets
• 2 x USB power sockets
• Neatly slots away in its fully retracted position
• No wiring necessary
• Easy to install - Simply drill hole in surface and plug into socket below
• 2m pre-wired cable
• Isolator switch included with neon indicator
• Cut out : 102-105mm diameter
• Minimum 350mm clearance beneath worktop
• Installation and operating instructions supplied with product
• IP20
• 3 Year Warranty
• Please Note: Each socket is no longer individually fused as per image - fused at plug only. Awaiting new image.

Stainless Steel Effect Triangle Worktop Twin Plug Sockets with Dual USB Charger

• Dimensions 93mm High x 93mm deep x 205mm wide (face on)
• IP20 Suitable for mounting under kitchen cabinets, Desks, workbenches, shelves, or directly on worktops against a wall
• May be connected directly to the ring main circuit (3 x 2.5mm or 2 x 4mm capacity)
• USB Chargers 5v DC 2.4A (Shared)
• Single pole switching on sockets

Stainless Steel Effect Round Worktop Single Plug Socket with USB Charger

• IP20 Suitable for mounting in kitchen worktops, desks, office workbenches etc
• Dimensions above worktop:120mm overall diameter of rim & 6mm in depth
• Dimensions below worktop:114mm cutout & 78mm recessed Depth
• Ideal alternative to pop up socket if no depth below unit
• Simply plugs in to another socket below (2m lead and 13A Plug included)
• USB Chargers 5v DC 2.4A (shared)
• Single pole switching on socket

IP54 Pull Up Worktop Tower Plug with 2 x 240v Sockets, 2  x USB Charger & Bluetooth Speaker

• For use in kitchen units or office workstations
• Bluetooth 2w Speaker with 3.5mm Jack and volume control
• 2 x 240v sockets 
• 2 x USB Charger sockets 5v DC 2.4A (shared)
• No wiring necessary, simply plug in below (2m pre-wired cable with 13A plug fitted)
• Black finish top with Chrome Handle
• Isolator switch included with neon indicator
• Unit can be pushed down until flush with unit whilst sockets are in use due to window on top cover
• Cut out : 90-92mm
• One year guarantee
• IP54

IP20 Worktop/Bench Power Unit with 2 x 240v Sockets, 2  x USB Charger &Speaker

• For use in desking systems, office workstations, kitchen worktops etc
• 2w Speaker with 3.5mm Jack and volume control
• 2 x 240v sockets 
• 2 x USB Charger sockets 5v DC 2.1A
• No wiring necessary, simply plug in below (2m pre-wired cable with 13A plug fitted)
• Black and Aluminium Finish
• Isolator switch included with neon indicator
• Unit is bolted to surface through drilled hole
• Width 337mm x 159mm Height
• One year guarantee
• Ip20 Rated

Pop Up Tower Socket with 3 x 240v Sockets - Worktop Socket

• Pop-up socket for use in kitchen units or office workstations
• Black finish
• 3 x 240v sockets
• No wiring necessary
• Easy to install
• 2m pre-wired cable with 13A plug fitted
• Isolator switch included with neon indicator
• Unit can be pushed down until flush with unit whilst sockets are in use due to window on top cover
• Cut out : 92mm
• One year guarantee
• IP54 rated

Stainless Steel Pop Up Power Plug Socket with 3 x UK Plug Sockets, 2 x USB Charger Sockets and a Bluetooth Speaker

• Pop-up socket for use in kitchen units or office workstations
• Stainless Steel top with Aluminium housing
• 3 x 240v UK plug sockets
• 2 x USB power sockets @ 500mA
• Bluetooth speaker
• Neatly slots away in its fully retracted position
• No wiring necessary
• Easy to install
• 2m pre-wired cable
• Isolator switch included with neon indicator
• Cut out : 102-105mm diameter
• Minimum 350mm clearance beneath worktop
• Installation and operating instructions supplied with product
• IP20
• 3 Year Warranty
• Please Note: Each socket is no longer individually fused as per image - fused at plug only. Awaiting new image.

Stainless Steel Effect Triangle 13a 2 Gang Twin Plug Sockets with Dual USB Charger

• Dimensions 77mm High x 77mm deep x 212mm wide (face on)
• IP20 Suitable for mounting under kitchen cabinets, Desks, workbenches, shelves, or directly on worktops against a wall
• May be connected with flex to the connectors or  directly to the ring main circuit (3 x 2.5mm or 2 x 4mm capacity)
• USB Chargers 5v DC 2.4A (Shared)
• Single pole switching on sockets
• 3 Yr Guarantee

Stainless Steel Effect Triangle 13a 2 Gang Twin Plug Sockets 

• Dimensions 77mm High x 77mm deep x 212mm wide (face on)
• IP20 Suitable for mounting under kitchen cabinets, Desks, workbenches, shelves, or directly on worktops against a wall
• May be connected with flex to the connectors or  directly to the ring main circuit (3 x 2.5mm or 2 x 4mm capacity)
• Also available with USB chargers
• Double pole switching on sockets
• 15 Yr Guarantee

• Flush fit hidden power point. The perfect discreet single socket powerport solution, perfect where limited space below the worktop.
• 2 USB ports for mobile phone and iPod charging 2.1A Total
• Stylish contemporary satin silver finish lid
• Suitable for use in kitchens, bedrooms or home office
• Total permissable load 3250w @ 240v
• IP20
• 3 Year Warranty
• Dimensions: 115mm Overall Diameter x 90mm Overall Depth x 100mm Cutout

Brushed chrome effect double compact pop up USB charger outlet for desks and worktop surfaces with a minimum thickness of 10mm

• USB Chargers 5v DC 2.4A
• IP20 Suitable for mounting in kitchen worktops, desks, office workbenches etc
• 44mm Cutout, 48mm overall diameter and overall height of 107mm
• See images for technical dimensions 
• Simply plugs in with 2m cable and power supply

Motorised Pop-Up Socket with 3 x UK Plug Sockets and 2 x USB Charger Sockets

• Simply touch the power button on top for the socket to rise auto
• For use in kitchen units or office desk workstations
• Silver plastic lid
• 3 x 240v UK plug sockets
• 2 x 1000mA USB power sockets for tablets and phones etc
• Anti pinch or collision function stops the pop up socket when obstruction is detected
• Accidental operation protection: automatic timer delay to prevent accidental activation by children
• No wiring necessary, very easy to install - simply drill hole in surface and plug into socket below
• 1.5m pre-wired cable
• Isolator switch included with neon indicator
• Cut out : 95mm diameter
• Minimum 500mm clearance beneath worktop
• Max wattage 3120w
• Water resistant when lid is closed
• Installation and operating instructions supplied with product
• IP20
• 3 Year Warranty

13A 1G Mounting Switched Socket with Dual USB Charger (2.4A) and 3W RMS Bluetooth Speaker 

This 3 in 1 solution is the perfect upgrade to any kitchen, bedroom or hotel room. Featuring a power outlet, Dual USB charging and a built in Bluetooth Speaker

• 13A Switched Socket
• 3W RMS Bluetooth Speaker
• Dual USB Charging 5V DC 2.4A (shared)
• Width 211.6mm
• Overall Height 79.5mm
• Projection 79.5mm
• IP20

• 13A Switched Socket
• 3W RMS Bluetooth Speaker
• Dual USB Charging 5V DC 2.4A (shared)
• Vertical corner mounting solution
• Width 112.12mm
• Overall Height 236.3mm
• Projection 73.55mm
• IP20

IP20 Worktop/Bench Power Unit with 2 x 240v 13a Sockets and 2  x USB Charger Black and Aluminium Finish

• For use in desking systems, office workstations, kitchen worktops, bedrooms and hotels
• 2 x 240v sockets with backlit on/off switch
• 2 x USB Charger sockets 5v DC 2.4A (Shared)
• Fitted with 2m cable (open end)
• Black and Aluminium Finish
• Isolator switch included with neon indicator
• Unit is bolted to surface through drilled hole
• Width 217.5mm x 160mm High x 62mm diameter
• 18mm cutout
• Minimum mounting depth: 14-30mm
• One year guarantee
• Ip20 Rated

Motorised Pop-Up Socket with 3 x UK Plug Sockets, QI phone charger and 2 x USB Charger Sockets

• Simply touch the power button on top for the socket to rise auto
• Integral QI charger in lid
• For use in kitchen units or office desk workstations
• Silver plastic lid
• 3 x 240v UK plug sockets
• 2 x 1000mA USB power sockets for tablets and phones etc
• Anti pinch or collision function stops the pop up socket when obstruction is detected
• Accidental operation protection: automatic timer delay to prevent accidental activation by children
• No wiring necessary, very easy to install - simply drill hole in surface and plug into socket below
• 1.5m pre-wired cable
• Isolator switch included with neon indicator
• Visible lid is 112mm diameter
• Cut out : 95mm diameter
• Minimum 500mm clearance beneath worktop
• Max wattage 3120w
• Water resistant when lid is closed
• Installation and operating instructions supplied with product
• IP20
• 3 Year Warranty

Desk mount USB charging socket for mounting in existing desk holes / cut outs or worktops / counters etc

• Dual USB Chargers 5v DC 4A Shared
• Type A and new Type C USB outlets
• Brushed chrome and black finish ABS plastic
• Plug in power supply included
• Ip20 rated
• 60mm or 80mm cutout required (2 adaptors included)
• Recessed depth 32mm
• Minimum void 75mm

• Pop Up Socket with 3 x UK Plug Sockets and 2 x USB Charger Sockets
• Designer pop-up socket for use in kitchen units or office workstations
• Stainless Steel Finish Metal top
• Aluminium housing
• 3 x 240v UK plug sockets
• 2 x 700mA USB power sockets Max 2400 mA
• Neatly slots away in its fully retracted position whilst appliances are still plugged in
• Specially designed handle for easy pull out
• No wiring necessary
• Easy to install
• 2.5m pre-wired cable
• Illuminated neon green control switch
• Cut out : 92mm diameter
• Dimensions: 345mm high when exposed
• Dimensions: 415mm in total
• IP54 rated
• Please note: Price is for pop up socket only and does not include mobile phone or other items as shown on lifestyle images

New Sensipod E is a smaller slimmer pop up socket than the original Sensio pods. It has a 80mm cutout and is 90mm overall making it ideal for places where space is tighter. Complete with 3 x UK sockets and 2 x USB charger sockets for phones, tablets etc

• Designer pop-up socket for use in kitchen units, motorhomes, campers and office workstations
• Stainless Steel Finish Metal top
• Aluminium housing
• 3 x 240v UK plug sockets
• 2 x USB power sockets total output 2A
• Specially designed handle for easy pull out
• No wiring necessary, simply plug in
• Easy to install
• 1.5m pre-wired cable
• Cut out : 80mm diameter
• Dimensions: 367mm high x 90mm wide (mm high when exposed)
• IP20 rated
• 220-240v 50hz
• Please note: Price is for pop up socket only and does not include mobile phone or other items as shown on lifestyle images

New Sensipod E is a smaller slimmer pop up socket than the original Sensio pods. It has a 80mm cutout and is 90mm overall making it ideal for places where space is tighter. Complete with 3 x UK sockets and 2 x USB charger sockets for phones, tablets etc

• Designer pop-up socket for use in kitchen units, motorhomes, campers and office workstations
• Aluminium finish top
• Aluminium housing
• 3 x 240v UK plug sockets
• 2 x USB power sockets total output 2A
• Specially designed handle for easy pull out
• No wiring necessary, simply plug in
• Easy to install
• 1.5m pre-wired cable
• Cut out : 80mm diameter
• Dimensions: 367mm high x 90mm wide (mm high when exposed)
• IP20 rated
• 220-240v 50hz
• Please note: Price is for pop up socket only and does not include mobile phone or other items as shown on lifestyle images

New Sensipod E is a smaller slimmer pop up socket than the original Sensio pods. It has a 80mm cutout and is 90mm overall making it ideal for places where space is tighter. Complete with 3 x UK sockets and 2 x USB charger sockets for phones, tablets etc

• Designer pop-up socket for use in kitchen units, motorhomes, campers and office workstations
• Matt black finish top
• Aluminium housing
• 3 x 240v UK plug sockets
• 2 x USB power sockets total output 2A
• Specially designed handle for easy pull out
• No wiring necessary, simply plug in
• Easy to install
• 1.5m pre-wired cable
• Cut out : 80mm diameter
• Dimensions: 367mm high x 90mm wide (mm high when exposed)
• IP20 rated
• 220-240v 50hz
• Please note: Price is for pop up socket only and does not include mobile phone or other items as shown on lifestyle images

Suitable for mounting in desktops and recess wall mounting.

Perfect for home Offices,Boardrooms,Hotel rooms.Complete with ON/OFF Rocker and dual USB

Fastcharge ports.

• Height 75mm,Width 328mm,Depth 52mm,Projection 2mm
• Cut Out Box W/H/D 323 X 65mm
• FASTCHARGE is achieved by switching voltage 5V-12V

• USB-C port

  • 5V DC 3A (15W) with standard devices
  • 9V DC 2A (18W) with QC and USB-PD compatible devices
  • 12V DC 1.5A (18W) with QC and USB-PD compatible devices

  USB-A port

  • 5V DC 2A (10W) with standard devices
  • 9V DC 2A (18W) with QC compatible devices
  • 12V DC 1.5A (18W) with QC compatible devices

• IP54 rated
• Diameter 100mm,Projection 10mm,Minimum Void 445mm,
• 3 x 13A sockets with back lit on/off rocker at base
• Built in Dual Fast Charge USB A+C
• Fitted with 2m cable and BS plug top
• Aluminium casing with die-cast metal top cap and handle
• Mounting board thickness: 10-50mm
• Cut out: 90-92mm (allowing a minimum 25mm clearance around the cut hole)
• FASTCHARGE USB-C port compatible with QC2.0/QC3.0 and USB-PD
• FASTCHARGE USB-A port compatible with QC2.0/QC3.0
• Capable of delivery 0-50% charge in under 30 mins with compatible phones
• 80% faster than a standard 5V DC 2A charger
• Compatible with Android based devices supporting QC2.0/QC3.0 and USB-PD (via USB-C port only)
• Compatible with Apple devices supporting USB-PD (iPhone 8 and above, require certified Lightning to USB-C charge/sync cable)

• IP54 rated
• Diameter 100mm,Projection 10mm,Minimum Void 445mm,
• 3 x 13A sockets with back lit on/off rocker at base
• Built in Dual Fast Charge USB A+C
• Fitted with 2m cable and BS plug top
• Aluminium casing with die-cast metal top cap and handle
• Mounting board thickness: 10-50mm
• Cut out: 90-92mm (allowing a minimum 25mm clearance around the cut hole)
• FASTCHARGE USB-C port compatible with QC2.0/QC3.0 and USB-PD
• FASTCHARGE USB-A port compatible with QC2.0/QC3.0
• Capable of delivery 0-50% charge in under 30 mins with compatible phones
• 80% faster than a standard 5V DC 2A charger
• Compatible with Android based devices supporting QC2.0/QC3.0 and USB-PD (via USB-C port only)
• Compatible with Apple devices supporting USB-PD (iPhone 8 and above, require certified Lightning to USB-C charge/sync cable)

Polar Bright White 12 Batten Lampholder (loop in 3 plate type) with Home Office Skirt

• 3 terminals inside for switched live, permanent live and neutral
• Dimensions : Base 86mm diameter x 77mm

Polar Bright White T2 Pendant Set

• Consisting of loop in 3 plate type ceiling rose, BC lampholder and flex
• 86mm diameter base

Selectric  White 150mm T2 Pendant Set with Flex

• Consisting of loop in 3 plate type ceiling rose, BC lampholder and flex
• 86mm diameter base

Black 150mm 6" T2 pendant pre wired ceiling rose light set with flex and E27 edison screw lamp holder ready to take a regular light shade

• Consisting of loop in 3 plate type ceiling rose, ES lamp holder and flex
• Ceiling rose dims:  89mm diameter base and 30mm depth
• Lamp holder dims: 70mm long x 43mm widest end x 20mm narrow end

LAMPS ARE NOT INCLUDED IN THE PRICE OF THE PENDANT OR VICE VERSA

Contemporary Style Metal Pendant Lamp Holder, Pre-Wired for easy installation

• This pendant set is not suitable for lampshades - If you want to fit a lampshade to your pendant please see HERE
• T2 rated 80W Incandescent /LED
• E27 lamp base
• Fixed drop
• Pre-wired
• Terminal capacity: 2 x 1.5mm²
• Lamp Holder Diameter 40mm
• Ceiling Rose Base 92mm

Contemporary Style Metal Pendant Lamp Holder, Pre-Wired for easy installation

• This pendant set is not suitable for lampshades - If you want to fit a lampshade to your pendant please see HERE
• T2 rated 80W Incandescent /LED
• E27 lamp base
• Fixed drop
• Pre-wired
• Terminal capacity: 2 x 1.5mm²
• Lamp Holder Diameter 40mm
• Ceiling Rose Base 92mm

Contemporary Style Metal Pendant Lamp Holder, Pre-Wired for easy installation

• This pendant set is not suitable for lampshades - If you want to fit a lampshade to your pendant please see HERE
• T2 rated 80W Incandescent /LED
• E27 lamp base
• Fixed drop
• Pre-wired
• Terminal capacity: 2 x 1.5mm²
• Lamp Holder Diameter 40mm
• Ceiling Rose Base 92mm

Contemporary Style Metal Pendant Lamp Holder, Pre-Wired for easy installation

• This pendant set is not suitable for lampshades - If you want to fit a lampshade to your pendant please see HERE
• T2 rated 80W Incandescent /LED
• E27 lamp base
• Fixed drop
• Pre-wired
• Terminal capacity: 2 x 1.5mm²
• Lamp Holder Diameter 40mm
• Ceiling Rose Base 92mm

Contemporary Style Metal Pendant Lamp Holder, Pre-Wired for easy installation

• This pendant set is not suitable for lampshades - If you want to fit a lampshade to your pendant please see HERE
• T2 rated 80W Incandescent /LED
• E27 lamp base
• Fixed drop
• Pre-wired
• Terminal capacity: 2 x 1.5mm²
• Lamp Holder Diameter 40mm
• Ceiling Rose Base 92mm

Contemporary Style Metal Pendant Lamp Holder, Pre-Wired for easy installation

• This pendant set is not suitable for lampshades - If you want to fit a lampshade to your pendant please see HERE
• T2 rated 80W Incandescent /LED
• E27 lamp base
• Fixed drop
• Pre-wired
• Terminal capacity: 2 x 1.5mm²
• Lamp Holder Diameter 40mm
• Ceiling Rose Base 92mm

Contemporary Style Metal Pendant Lamp Holder, Pre-Wired for easy installation

• This pendant set is not suitable for lampshades - If you want to fit a lampshade to your pendant please see HERE
• T2 rated 80W Incandescent /LED
• E27 lamp base
• Fixed drop
• Pre-wired
• Terminal capacity: 2 x 1.5mm²
• Diameter 40mm , Projection 272mm

Vintage Style Metal Pendant Lamp Holder, Pre-Wired for easy installation

• T2 rated 80W Incandescent /LED
• E27 lamp base
• Fixed drop
• Pre-wired
• Terminal capacity: 2 x 1.5mm²
• Lamp Holder Diameter 51mm
• Ceiling Rose Base 92mm

Vintage Style Metal Pendant Lamp Holder, Pre-Wired for easy installation

• T2 rated 80W Incandescent /LED
• E27 lamp base
• Fixed drop
• Pre-wired
• Terminal capacity: 2 x 1.5mm²
• Lamp Holder Diameter 51mm
• Ceiling Rose Base 92mm

Vintage Style Metal Pendant Lamp Holder, Pre-Wired for easy installation

• T2 rated 80W Incandescent /LED
• E27 lamp base
• Fixed drop
• Pre-wired
• Terminal capacity: 2 x 1.5mm²
• Lamp Holder Diameter 51mm
• Ceiling Rose Base 92mm

Bronze pendant pre wired ceiling rose light set with black flex and E27 edison screw lamp holder ready to take a regular light shade

• Consisting of loop in 3 plate type ceiling rose, ES lamp holder and flex
• Adjustable cable length - Max 1m
• Bottom section unscrews to allow a shade to be fitted

LAMPS ARE NOT INCLUDED IN THE PRICE OF THE PENDANT OR VICE VERSA

Pewter pendant pre wired ceiling rose light set with black flex and E27 edison screw lamp holder ready to take a regular light shade

• Consisting of loop in 3 plate type ceiling rose, ES lamp holder and flex
• Adjustable cable length - Max 1m
• Bottom section unscrews to allow a shade to be fitted

LAMPS ARE NOT INCLUDED IN THE PRICE OF THE PENDANT OR VICE VERSA

Brushed copper pendant pre wired ceiling rose light set with black flex and E27 edison screw lamp holder ready to take a regular light shade

• Consisting of loop in 3 plate type ceiling rose, ES lamp holder and flex
• Adjustable cable length - Max 1m
• Bottom section unscrews to allow a shade to be fitted

LAMPS ARE NOT INCLUDED IN THE PRICE OF THE PENDANT OR VICE VERSA

• Perfect replacement for standard ceiling rose pendants
• Requires 1 x E27 Edison Screw lamp
• Height: 120mm - Diameter: 180mm

LAMPS ARE NOT INCLUDED IN THE PRICE OF THE PENDANT OR VICE VERSA

• Perfect replacement for standard ceiling rose pendants
• Requires 1 x E27 Edison Screw lamp
• Height: 120mm - Diameter: 180mm

LAMPS ARE NOT INCLUDED IN THE PRICE OF THE PENDANT OR VICE VERSA

• Perfect replacement for standard ceiling rose pendants
• Requires 1 x E27 Edison Screw lamp
• Height: 120mm - Diameter: 180mm

LAMPS ARE NOT INCLUDED IN THE PRICE OF THE PENDANT OR VICE VERSA

• Perfect replacement for standard ceiling rose pendants
• Requires 1 x E27 Edison Screw lamp
• Space between ceiling and shade ring
• Can be fitted with most easyfit shades
• Height: 100mm - Diameter: 105mm

LAMPS ARE NOT INCLUDED IN THE PRICE OF THE PENDANT OR VICE VERSA

• Perfect replacement for standard ceiling rose pendants
• Requires 1 x E27 Edison Screw lamp
• Space between ceiling and shade ring
• Can be fitted with most easyfit shades
• Height: 100mm - Diameter: 105mm

LAMPS ARE NOT INCLUDED IN THE PRICE OF THE PENDANT OR VICE VERSA

• Perfect replacement for standard ceiling rose pendants
• Requires 1 x E27 Edison Screw lamp
• Space between ceiling and shade ring
• Can be fitted with most easyfit shades
• Height: 100mm - Diameter: 105mm

LAMPS ARE NOT INCLUDED IN THE PRICE OF THE PENDANT OR VICE VERSA

Pewter effect 6 pendant light set that can be set out to your individual taste, with adjustable cord mounts that you screw to the ceiling so the lamp pendants can be set at whatever height you prefer

• Pewter fittings with rope cables
• Requires 6 x E27 Edison Screw lamp
• Hook and loop fixings to create your own style
• Height adjustble: 110mm - 1420mm - Diameter: Max 2550mm

LAMPS ARE NOT INCLUDED IN THE PRICE OF THE PENDANT OR VICE VERSA

• Pewter fitting with rope cable
• Requires 1 x E27 Edison Screw lamp
• Height adjustable: 1050mm - Diameter: 100mm

LAMPS ARE NOT INCLUDED IN THE PRICE OF THE PENDANT OR VICE VERSA

• Requires 1 x E27 Edison Screw lamp (not included)
• Paintable plaster finish
• Height: 85mm (ceiing to lampholder) - Diameter: 500mm

LAMPS ARE NOT INCLUDED IN THE PRICE OF THE PENDANT OR VICE VERSA

• Requires 1 x E27 Edison Screw lamp (not included)
• Paintable plaster finish
• Height: 60mm (ceiing to lampholder) - Diameter: 300mm

LAMPS ARE NOT INCLUDED IN THE PRICE OF THE PENDANT OR VICE VERSA

• Requires 1 x E27 Edison Screw lamp (not included)
• Paintable plaster finish
• Height: 60mm (ceiing to lampholder) - Diameter: 300mm

LAMPS ARE NOT INCLUDED IN THE PRICE OF THE PENDANT OR VICE VERSA

• Requires 1 x E27 Edison Screw lamp (not included)
• Paintable plaster finish
• Height: 80mm (ceiing to lampholder) - Diameter: 500mm

LAMPS ARE NOT INCLUDED IN THE PRICE OF THE PENDANT OR VICE VERSA

Matt black semi flush ceiling fitting with 6 x E27 edison screw fittings that will accept most ES lamps. Complete the look with our LED vintage filament lamps for a warm cosy glow and modern look.

• 6 x 40w Max E27 ES regular edison screw in lamps (not included, choose from listing)
• 430mm (17") High x 455mm (18') Diameter
• 2 Year warranty

Our paddle range with an Intergrated LED system, a 3 stage dimmer and is height adjustable. The 1 light pendant has a matt black finish. It is suitable for hallways, lounges or bedrooms.

• Height: 390mm
• Height with Chain: 1200mm
• Width: 160mm
• Length: 160mm
• Lampholder: LED
• Wattage: 11w
• Voltage: 220-240v 50/60Hz
• Lumens: 315
• Colour Temperature: Warm White

The Sputnik metal pendant is available in a matt black finish. The 70's inspired design has metal spikes to create an eye catching piece for a contemporary living space. Also available as a semi-flush fitting.

• Height: 560mm
• Height with Chain: 1200mm
• Width: 560mm
• Lampholder: E14
• Wattage: 40w
• Voltage: 220-240v 50/60Hz
• Lamp Included: No

A timeless traditional exterior bollard, matt black painted die cast aluminium with clear glass panels and decorative details. Combine with a filament LED lamp to create an authentic look of the past

Matt black dia cast aluminium alloy metalwork

Height: 1050mm Diameter: 225mm

E27 Edison Screw Fitting (Lamp Not Included)

IP44 Rated

Matte black 3 light spot fitting that can be adjusted to suit your requirements, regular 35w GU10 lamps can be used but better suited to LED GU10 lamps (see listing)

• Adjustable heads 350dg rotation, 90dg tilt
• Dimmable with suitable lamp
• Dimensions: Overall diameter of base plate 150mm, Overall projection 125mm
• IP20 rated
• 230v 50hz
• Also available in other finishes click here
• 1 Year Warranty

Matte black 4 light circular spot fitting that can be adjusted to suit your requirements, regular 35w GU10 lamps can be used but better suited to LED GU10 lamps (see listing)

• Adjustable heads 350dg rotation, 90dg tilt
• Dimmable with suitable lamp
• Dimensions: Overall diameter of base plate 160mm, Overall projection 125mm
• IP20 rated
• 230v 50hz
• Also available in other finishes click here
• 1 Year Warranty

Matte black 4 light bar spot fitting that can be adjusted to suit your requirements, regular 35w GU10 lamps can be used but better suited to LED GU10 lamps (see listing)

• Adjustable heads 350dg rotation, 90dg tilt
• Dimmable with suitable lamp
• Dimensions: Overall length of base plate 520mm, width of base plate 50mm, Overall projection 125mm
• IP20 rated
• 230v 50hz
• Also available in other finishes click here
• 1 Year Warranty

Matte black 1 light spot fitting that can be adjusted to suit your requirements, regular 35w GU10 lamp can be used but better suited to LED GU10 lamp (see listing)

• Adjustable head 350dg rotation, 90dg tilt
• Dimmable with suitable lamp
• Dimensions: Overall diameter of base plate 80mm, Overall projection 125mm
• IP20 rated
• 230v 50hz
• Also available in other finishes click here
• 1 Year Warranty

Iona Range

• Constructed From Grade 316 Stainless Steel
• Supplied with Grade 316 fixings
• Increased resistance to corrosion in Coastal areas
• IP44
• 2 x GU10 LED 5W (LAMP NOT INCLUDED)
• Projection 90mm, Width 70mm, Height 160mm
• 5 Year Guarantee

Matt black loop ceiling pendant light with satin brushed brass inner

• Height adjustable 500mm to 1.2 metre black fabric flex
• Width 390mm 
• Diameter 150mm
• Lamp Required LED E27 GLS (not included)
• 2 Yr warranty

LAMPS ARE NOT INCLUDED IN THE PRICE OF THE PENDANT OR VICE VERSA

Matt black semi flush ceiling fitting with 5 x E27 edison screw fittings that will accept most ES lamps. Complete the look with our LED vintage filament lamps for a warm cosy glow and modern look.

• 5 x 40w Max E27 ES regular edison screw in lamps (not included, choose from listing)
• 305mm Ceiling to lowest point x 530mm Diameter
• 2 Year warranty

• Height 650mm
• Width 108mm
• Depth 108mm
• 230V
• Die-cast aluminium construction
• Powder-coated finish
• Opal polycarbonate diffuser
• Supplied with mounting kit as standard
• E27 20W. LED lamp
• ***Lamp not included***

• Height 265mm
• Width 108mm
• Depth 108mm
• 230V
• Die-cast aluminium construction
• Powder-coated finish
• Opal polycarbonate diffuser
• Supplied with mounting kit as standard
• E27 20W. LED lamp
• ***Lamp not included***

• Height 245mm
• Width 108mm
• Projection 148mm
• 230V
• Die-cast aluminium construction
• Powder-coated finish
• Opal polycarbonate diffuser
• E27 20W. LED lamp
• ***Lamp not included***

• Height 650mm x Diameter 102mm
• Ideal For post,Doorway,Garden etc
• Stainless steel body
• Powder coated Anthracite finish
• Indoor and outdoor
• LED compatible
• 230V
• IP54
• Lamp - GU10 (NOT INCLUDED)

Matt black studio six light pendant, simple in construction with matt black painted lamp holders suspended from height adjustable black fabric flex.

• 6 x E27 ES regular edison screw in lamps (not included, choose from listing)
• Adjustable Height and Diameter - H: 220mm-1620mm D:150mm-3000mm
• 2 Year warranty
• Select the position of each lamp, able to reach over a large area of your interior for perfect illumination
• Fixing accessories included
• Dimmable (When using dimmable LED lamps)

Matt Black Triple Spotlight G9 IP44 with Frosted Glass

Diameter 246mm,Projection 122mm, Tilt 90 Degrees,Rotation 360 Degrees

• Adjustable head 350° rotation, 90° tilt
• Opal glass orbs
• Dimmable subject to lamp
• 3 x 25W Max G9 (lamps not included)

• Adjustable head 350° rotation, 90° tilt
• Opal glass diffuser
• Pull cord on/off switch
• Dimmable subject to lamp
• Height 100mm,Diameter 55mm,Projection 123mm

Vintage Style Metal Pendant Lamp Holder, Pre-Wired for easy installation

• T2 rated 80W Incandescent /LED
• E27 lamp base
• Fixed drop
• Pre-wired
• Terminal capacity: 2 x 1.5mm²
• Lamp Holder Diameter 51mm
• Ceiling Rose Base 92mm

Create that cool urban look with this industrial six light pendant, simple in construction with smooth copper plated lamp holders suspended from height adjustable black fabric flex. Select the position of each lamp, able to reach over a large area of your interior for perfect illumination.

• 6 x E27 ES regular edison screw in lamps (not included, choose from listing)
• Adjustable Height and Diameter - H: 220mm-1620mm D:150mm-3000mm
• 2 Year warranty
• Select the position of each lamp, able to reach over a large area of your interior for perfect illumination
• Fixing accessories included
• Dimmable (When using dimmable LED lamps)

Smooth Chrome studio six light pendant, simple in construction with matt black painted lamp holders suspended from height adjustable black fabric flex.

• 6 x E27 ES regular edison screw in lamps (not included, choose from listing)
• Adjustable Height and Diameter - H: 220mm-1620mm D:150mm-3000mm
• 2 Year warranty
• Select the position of each lamp, able to reach over a large area of your interior for perfect illumination
• Fixing accessories included
• Dimmable (When using dimmable LED lamps)

Mixed Plated Hoop three light pendant, simple in construction with lamp holders suspended from height  black  flex.

• 3 x E27 ES regular edison screw in lamps (not included, choose from listing)
• Adjustable Height and Diameter - H: 700mm-1200mm W; 388mm D:220mm
• 2 Year warranty
• Fixing accessories included
• Dimmable (When using dimmable LED lamps)

Modern solar powered LED table lamp in matt black finish, IP44 rated for safe outdoor use

• Available in 2 sizes
• Short - H: 250mm x W: 150mm x D: 150mm
• Tall - H: 450mm x W: 150mm x D: 150mm
• 3.15w Warm White 3000k LED
• This product can also be charged using the supplied USB cable
• Touch 3 stage dimmer switch - 20 lumen, 90 lumen & 230 lumen
• This is a touch lamp ON/OFF, touch the button to turn on. Touch again to make it brighter, brightest, and then off again
• Corrosive resistant aluminium construction
• Solar panel has an integrated daylight sensor - enabling the light to come on at dusk and switch off at dawn. Ensure the product is located in a sunny position to ensure effective recharging of the battery

Vintage Style Metal Pendant Lamp Holder, Pre-Wired for easy installation

• T2 rated 80W Incandescent /LED
• E27 lamp base
• Fixed drop
• Pre-wired
• Terminal capacity: 2 x 1.5mm²
• Lamp Holder Diameter 51mm
• Ceiling Rose Base 92mm

Traditional black lantern style outside wall light with PIR motion sensor and 6 glass panels

• Height 360mm,Width 167mm,Projection 215mm
• IP44
• 10W LED E27 GLS (not included)
• Also available in black and white
• Also available without PIR motion sensor

LED guide or wall light in cool matt black, ideal for lighting stairs, passageways or areas where little light pollution will be created a the light shines down.

• Height 130mm, Width 180mm, Projection 90mm
• 10W LED
• 4000K
• IP54
• Die Cast Aluminium Construction
• 280 lms
• Also available in Anthracite Grey and Matt White

Small and neat matt black GU10 wall washing down light with inter changeable bulb so different effects can be achieved with your choice of lamp. 

• Height 92mm
• Width 68mm
• Projection 81mm
• IP44
• Also available in up/down version here
• Also available in Stainless Steel here
• 5W LED GU10(Max) Not included see here

Classy outside wall lantern in matte black finish which accepts E27 lamp so nice effect can be achieved with warm glow lamps

• Lamp 1 x E27 10W LED GLS (lamp not included) Available here
• IP44
• Durable polycarbonate shade
• 240v
• Also available in Stainless Steel here

Black rectangle box lantern with ribbed readed style glass, suitable for outdoor use IP44

• Wall Mounted Exterior and External 
• Ribbed Glass Effect
• Height 445mm, Width 180mm, Projection 141mm
• Lamp 1 x 10W LED E27 GLS (lamp not included)Available here
• IP44
• 240V

Black rectangle outside wall mounted box lantern with frame effect and opal polycarbonate diffuser to soften the light, suitable for outdoor use IP54. Cool white LED lights means no more bulbs to buy. 

• Wall Mounted Exterior and External 
• Height 280mm, Width 160mm, Projection 120mm
• 18W LED SMD
• Opal polycarbonate diffuser
• 4000K Cool White
• 1000 lms
• IP54
• 240V

Low profile black half lantern outdoor wall lantern light fitting with dusk to dawn photocell which will switch lights on automatically. For use outside front doors, driveways and pathways etc. IP44 rating means it's ok to use on external walls.

• Photocell switches light on at dusk and off at dawn
• Height 380mm, Width 210mm, Projection 100mm
• IP44
• Lamp 1 x 10W LED E27 GLS (lamp not included)
• 240V
• Also available without dawn to dusk photocell sensor here

• Height 180mm
• Width 100mm
• Projection 90mm
• Die Cast Aluminium Construction with Polycarbonate Diffuser
• IP44
• 1 x 5W GU10 LED (not included)

Matt black LED ceiling light

• 21w Integrated LED
• Height 367mm - Width (of widest hoop) 392mm
• 3000K Warm White LED - 1950 Lumen output
• LED driver built in
• Non Dimmable

Matt black LED ceiling light

• 30.7w Integrated LED
• Height Adjustable 500mm-1500mm - Width (of widest hoop) 510mm
• 3000K Warm White LED - 1920 Lumen output
• LED driver built in
• Non Dimmable

Modern style outdoor wall lantern in matt black finish.

• Projection: 160mm Width: 100mm Height: 300mm
• Class 1 fitting needs earth connection
• IP44 Rated for weather protection
• Max 10w LED lamp can be fitted E27 edison screw fitting, see lamp options
• 2YR Warranty

LAMPS ARE NOT INCLUDED IN THE PRICE OF THE FITTING 

Geometric shaped wire frame pendant light, finished in a matt black finish with smart satin gold painted detail. Suspended from height adjustable twisted black fabric flex. pair with filament LED lamps for that perfect modern style

• Overall Height (adjustable) 570-1470mm - Diameter 400mm - Shade Height 445mm
• 10W LED E27 (Not Included)
• 2YR Warranty
• Dimmable when using a dimmable lamp
• Matt black & satin gold painted finish

• 1250mm Flex from base to light
• Height 110mm
• Diameter 60mm
• Base Diameter 65mm
• Base Height 35mm
• Aluminium Construction
• Lamp Required 5W LED GU10 (not included)
• IP20

Grey Category 5e RJ45 network data cable 

• RJ45 plug to plug
• Over moulded connectors with strain relief to ensure minimal bend radius
• Ideal for connecting PC, MAC, laptops, smart tv's and other network devices or modem router/switch for network connection

Black Category Cat6 RJ45 network data cable 

• RJ45 plug to plug
• Over moulded connectors with strain relief to ensure minimal bend radius
• Ideal for connecting PC, MAC, laptops, smart tv's and other network devices or modem router/switch for network connection

• RJ45 to RJ45 Socket 
• Suitable for connecting cables together ensuring to maintain coutinuity
• Height 21mm
• Width  16.3mm
• Length 35mm

Cat5e RJ45 module suitable for euro media plates

• Height  50mm
• Recessed Depth 18mm
• Width 25mm

Cat6 RJ45 module suitable for euro media plates

• Height  50mm
• Recessed Depth 18mm
• Width 25mm

Power outlet suitable for use with Euro Data Plates

• Height & Width 50mm x 50mm
• Depth 28mm
• 13Amp Rated
• Unswitched

Power outlet suitable for use with Euro Data Plates

• Height & Width 50mm x 50mm
• Depth 26mm
• 5Amp Rated
• Unswitched

Telecoms Oulet suitable for use with Euro Data Plates

• Height 50mm
• Width  25mm
• Recessed Depth 21mm
• BT Outlet

Telecoms Oulet suitable for use with Euro Data Plates

• Height 50mm
• Width  25mm
• Recessed Depth 21mm
• Master BT Outlet

Telecoms Outlet suitable for use with Euro data plates

• Height 50mm
• Width  25mm
• Recessed Depth 18mm
• IDC Terminals

Fully Screened TV and FM DAB aerial outlet, Low Loss Minimal ingress negligible module cross talk and matching isolation.

• Height 50mm
• width  50mm
• Recessed Depth 31mm

Fully Screened TV and SAT TV Outlet, Low Loss Minimal ingress negligible module cross talk and matching isolation.

• Height 50mm
• width  50mm
• Recessed Depth 31mm

Fully Screened TV /FM DAB/ SAT TV Aerial Outlet, Low Loss Minimal ingress negligible module cross talk and matching isolation.

• Height 50mm
• width  50mm
• Recessed Depth 31mm

Fully Screened SAT1/SAT2/TV/FM DAB Aerial Outlet, Low Loss Minimal ingress negligible module cross talk and matching isolation.

• Height 50mm
• width  50mm
• Recessed Depth 31mm

TV co axial television arial outlet suitable for use with Eurodata modular plates

• Height 50mm
• Recessed Depth 25mm
• Width 25mm

SAT TV Outlet suitable for use with Eurodata Plates

• Height 50mm
• Width  25mm
• Recessed Depth 12.5mm

 HDMI 50 x 25mm data outlet module suitable to use with Eurodata Plates

• Height 50mm
• Width  25mm
• Recessed Depth 40mm
• HDMI Socket on 100mm Cable at Rear

Dual USB charger (2A) outlet module suitable to use with Eurodata Plates

• Height 50mm
• Width  50mm

Blanking Module used for Spacing or Blanking unused modular postions in Eurodata Plates

• Height 50mm
• Width  25mm

Brush strip single module ideal for hiding away unsightly cables for use with Eurodata plates

• Height 50mm
• Width  25mm

Brush strip module ideal for hiding away unsightly cables for use with Eurodata plates

• Height 50mm
• Width  50mm

Four module double brush strip module ideal for hiding away unsightly cables for use with Eurodata plates

• Height 50mm
• Width  100mm

Facilitates tidy cable management through walls Ideal for achieving the 'floating' TV look 

Blanking Module used for Spacing or Blanking unused modular positions in Eurodata Plates

• Height 50mm
• Width  12.5mm

Network Patch Panel for use in 19" 2U 48-Port Rackmount Equipment

Available for CAT5e & CAT6 

• Height 89mm,Width 32mm,Length 482mm
• 19"
• 2U
• 48-Port
• Universal/110 IDC Termination
• Port Identification
• Dual 568A/B Wiring
• Includes Fixings & 2 Rear Cable Management Bars
• IP20
• 1 Year Warranty

Professional IDC Tool for use on making Terminations on Telephone and RJ45 Sockets

• Height 20mm,Width 34mm,Length 178mm
• Built in cutter automatically trims excess wiring during use
• Tool clicks to show successful termination
• Includes hook attachments for undoing IDC connections

• HDMI2.0 HDMI-A to HDMI-A
• Black and grey cable with nylon braiding and over moulded strain relief for durability
• Gold plated connectors for enhanced connectivity
• Supports 1080p / 4K / 4K 60Hz / 3D / HDR
• Supports ARC and 18Gbps
• HDMI 2.0 Certified

• Ideal For connecting HD Devices to HD Displays
• Includes HDMI to Mini/Micro HDMI adapter for connection to portable HD devices
• 30 AWG
• Gold Plated contacts for optimum connectivity
• Durable over-moulded connectors
• Nylon Braiding for longevity
• Supports 4K/UHD
• Full HD 2160p 2K x 4K (3840 x 2160)
• Supports audio return channel (ARC)
• Supports 3D
• HDMI certified
• Length 3m

Dual USB Charger Outlet suitable for use with Euro data plates

• 25 x 50mm
• Dual USB charger 5V DC 3.1A (shared)
• 1 x Type-A
• 1 x Type-C

Premium Ultra High Speed HDMI Cable

• HDMI2.1 HDMI-A to HDMI-A
• Black and grey cable with nylon braiding, over moulded strain relief, and metal head for durability
• Gold plated connectors for enhanced connectivity
• Supports 8K 60Hz
• Supports 1080p / 4K / 4K 120Hz / 3D / HDR
• Supports ARC and 48Gbps
• HDMI 2.1 Certified

• USB-C to USB-C
• 1.5m black cable with over moulded strain relief for durability
• Supports up to 20V 3A (60W)
• Supports 5Gbps transfer rates
• USB Certified

• USB-A to USB-C
• 1.5m black cable with over moulded strain relief for durability
• Supports up to 20V 3A (60W)
• Supports 5Gbps transfer rates
• USB Certified

• 100W USB-PD Cable
• USB-C to USB-C
• 1.5m black and grey cable with nylon braiding and over moulded strain relief for durability
• Supports up to 20V 5A (100W)
• Supports 10Gbps transfer rates between supporting devices i.e. Thunderbolt 3, 5K and UHD displays
• Supports 4K HD
• E-Marker IC
• USB Certified

Suitable for use in Euro modular frames that can take a 50mm x 50mm module. i.e SF2GMB

• Voltage: 220-240V 50Hz
• Height 50mm, Width 50mm, Recessed Depth 40mm, Min Mounting Box Depth 47mm
• Loading: Max. 100W LED and 200W Incandescent
• Operation: Passive infrared
• Time pre-set: 3 mins
• Field of Detection: 120°
• Range: 5m
• Suitable for 47mm back box
• Lux sensitive and Time operation fixed
• Live and Neutral wiring required

Suitable for use in Euro modular frames that can take a 50mm x 50mm module. i.e SF2GAT

• Voltage: 220-240V 50Hz
• Height 50mm, Width 50mm, Recessed Depth 40mm, Min Mounting Box Depth 47mm
• Loading: Max. 100W LED and 200W Incandescent
• Operation: Passive infrared
• Time pre-set: 3 mins
• Field of Detection: 120°
• Range: 5m
• Suitable for 47mm back box
• Lux sensitive and Time operation fixed
• Live and Neutral wiring required

Suitable for use in Euro modular frames that can take a 50mm x 50mm module. i.e SF2GMW

• Voltage: 220-240V 50Hz
• Height 50mm, Width 50mm, Recessed Depth 40mm, Min Mounting Box Depth 47mm
• Loading: Max. 100W LED and 200W Incandescent
• Operation: Passive infrared
• Time pre-set: 3 mins
• Field of Detection: 120°
• Range: 5m
• Suitable for 47mm back box
• Lux sensitive and Time operation fixed
• Live and Neutral wiring required

Suitable for use in Euro modular frames that can take a 50mm x 50mm module. i.e SF2GMB

• Voltage: 220-240V 50Hz
• Height 50mm, Width 50mm, Recessed Depth 40mm, Min Mounting Box Depth 47mm
• Loading: Max. 100W LED and 200W Incandescent
• Operation: Passive infrared
• Time pre-set: 3 mins
• Field of Detection: 120°
• Range: 5m
• Override button switches between AUTO mode and ON
• Suitable for 47mm back box
• Lux sensitive and Time operation fixed
• Live and Neutral wiring required

Suitable for use in Euro modular frames that can take a 50mm x 50mm module. i.e SF2GAT

• Voltage: 220-240V 50Hz
• Height 50mm, Width 50mm, Recessed Depth 40mm, Min Mounting Box Depth 47mm
• Loading: Max. 100W LED and 200W Incandescent
• Operation: Passive infrared
• Time pre-set: 3 mins
• Field of Detection: 120°
• Range: 5m
• Override button switches between AUTO mode and ON
• Suitable for 47mm back box
• Lux sensitive and Time operation fixed
• Live and Neutral wiring required

Suitable for use in Euro modular frames that can take a 50mm x 50mm module. i.e SF2GMW

• Voltage: 220-240V 50Hz
• Height 50mm, Width 50mm, Recessed Depth 40mm, Min Mounting Box Depth 47mm
• Loading: Max. 100W LED and 200W Incandescent
• Operation: Passive infrared
• Time pre-set: 3 mins
• Field of Detection: 120°
• Range: 5m
• Override button switches between AUTO mode and ON
• Suitable for 47mm back box
• Lux sensitive and Time operation fixed
• Live and Neutral wiring required

Perfect solution for preventing the transfer of germs and bacteria in both domestic and commercial environments.

• Gesture sensor control ON/OFF
• Sensor distance: Max. 3cm
• Requires neutral wire
• 50 x 50mm euro module design
• Min. mounting box depth: 47mm

Perfect solution for preventing the transfer of germs and bacteria in both domestic and commercial environments.

• Gesture sensor control ON/OFF
• Sensor distance: Max. 3cm
• Requires neutral wire
• 50 x 50mm euro module design
• Min. mounting box depth: 47mm

IP66 Outdoor Weatherproof Electrical Connector Box

• Dimensions 85mm x 85mm x 45mm deep
• 2 x 20mm threaded entries on each side
• 2 x membrane entries on each side
• Off White / Light Grey finish
• Fast easy fixing kit included

IP65 Exterior Accessory Box - 1 Gang Single

• IP65 rated accessory box
• Fits standard sockets, switches & RCD's
• Spring closing lid
• Polycarbonate construction
• Dustproof
• Padlock facility
• Grey finish

Waterproof and Weatherproof Black Cable Connector

• IP68 Safety weatherproof cable connector
• For joining and repairing outdoor cables up to 3 core 1.5mm
• Can be submerged in water to depths of 20m for up to 30mins
• IP68 rated at 2 bar
• Maximum current : 16 Amps
• Maximum Voltage: 250v
• Minimum cable diameter : 5mm
• Maximum cable diameter : 9mm
• Dimensions : 37.5mm Wide x 115mm Long
• Suitable for round cable - 0.75mm2 - 1.5mm2

13a 1 gang single switched socket that is ip66 rated for weatherproof outdoor use. 

• IP66 Waterproof protection
• Dimensions: 116mm wide x 158mm high x 90mm deep
• Lockable and hinged cover
• Multiple knockouts
• 10 Yr Warranty

13a 2 gang double switched socket that is ip66 rated for weatherproof outdoor use. 

• IP66 Waterproof protection
• Dimensions: 173mm wide x 163mm high x 90mm deep
• Lockable and hinged cover
• Multiple knockouts
• 10 Yr Warranty

IP66 13a single outdoor switched fused spur connection unit with neon that is ip66 rated for weatherproof outdoor use. 

• IP66 Waterproof protection
• Dimensions: 116mm wide x 158mm high x 90mm deep
• Lockable and hinged cover
• Multiple knockouts
• 10 Yr Warranty

13a 1 gang single empty enclosure that is ip66 rated for weatherproof outdoor use. 

• Will accept most single sized wiring accessories
• IP66 Waterproof protection
• Dimensions: 116mm wide x 158mm high x 90mm deep
• Lockable and hinged cover
• Multiple knockouts
• 10 Yr Warranty

13a 2 gang double empty enclosure that is ip66 rated for weatherproof outdoor use. 

• Will accept most twin sized wiring accessories
• IP66 Waterproof protection
• Dimensions: 173mm wide x 163mm high x 90mm deep
• Lockable and hinged cover
• Multiple knockouts
• 10 Yr Warranty

Outdoor power socket with power on/off indication that can be seen through the transparent lid.

• Manufactured from robust, high impact grade polycarbonate for a long life.
• Black finish with a smoked black front casing for indicator visibility
• Height 153mm,Width 170mm,Projection 84mm
• IP66
• IK06 Rated
• 230V
• Multiple 20mm Cable Entries/Exits For Optimum Postioning

Outdoor power socket with power on/off indication that can be seen through the transparent lid.

• Manufactured from robust, high impact grade polycarbonate for a long life.
• Black finish with a smoked black front casing for indicator visibility.
• Height 153mm,Width 110mm,Projection 84mm
• IP66
• IK06 Rated
• 230V
• Multiple 20mm Cable Entries/Exits For Optimum Postioning

• Outdoor switch with blue LED activity/location feature.
• Height 90mm,Width 90mm,Projection 66mm
• Manufactured from robust, high impact grade polycarbonate for a long life
• Black finish with unique circular rocker switch
• IP66 / IK06 rated
• 20AX 1G 2-way switch function
• Multiple 20mm cable entries/exits allow for optimum positioning

• Outdoor switch with blue LED activity/location feature.
• Height 90mm,Width 90mm,Projection 66mm
• Manufactured from robust, high impact grade polycarbonate for a long life
• Black finish with unique semi circular rocker switches
• IP66 / IK06 rated
• 20AX 2G 2-way switch function
• Multiple 20mm cable entries/exits allow for optimum positioning

• Outdoor switch with blue LED activity/location feature.
• Height 90mm,Width 90mm,Projection 66mm
• Manufactured from robust, high impact grade polycarbonate for a long life
• Black finish with unique circular rocker switch printed "PRESS"
• IP66 / IK06 rated
• 20AX 1G 2-way switch function
• Multiple 20mm cable entries/exits allow for optimum positioning

Outdoor Switched Fused Spur with power on/off indication that can be seen through the transparent lid.

• Manufactured from robust, high impact grade polycarbonate for a long life.
• Black finish with a smoked black front casing for indicator visibility.
• Height 153mm,Width 110mm,Projection 84mm
• IP66
• IK06 Rated
• 230V
• Multiple 20mm Cable Entries/Exits For Optimum Postioning

Outdoor Fused Spur with power on/off indication that can be seen through the transparent lid.

• Manufactured from robust, high impact grade polycarbonate for a long life.
• Black finish with a smoked black front casing for indicator visibility.
• Height 153mm,Width 110mm,Projection 84mm
• IP66
• IK06 Rated
• 230V
• Multiple 20mm Cable Entries/Exits For Optimum Postioning

Ideal for creating  bespoke outdoor wiring requirements, for outdoor seasonal lighting and general outdoor power requirements

• IP55/IK06
• 5 channel gasket allows 1 x power in and 4 x power out, ideal for use with a 4G trailing socket
• Height 334mm ,Width 220mm ,Projection 116mm
• Wall Mountable (mounting bracket supplied)
• Supplied with a velcro pad inside and velcro tape for mounting lightweight devices and holding them in place
• Screwless design, easy to open and close

Ideal for creating  bespoke outdoor wiring requirements, for outdoor seasonal lighting and general outdoor power requirements

• IP55/IK06
• 5 channel gasket allows 1 x power in and 4 x power out, ideal for use with a 4G trailing socket
• Height 334mm ,Width 220mm ,Projection 116mm
• Wall Mountable (mounting bracket supplied)
• Supplied with a velcro pad inside and velcro tape for mounting lightweight devices and holding them in place
• Screwless design, easy to open and close

Kit Includes

• IP66 13A 2G DP Switched Socket
• 3m of H07RN-F 1.5mm Outdoor Grade Cable
• IP66 20mm Cable Gland
• Re-wireable RCD Safety Plug
• Height 153mm ,Width 170mm, Projection 84mm

13a 2 gang twin switched socket that is ip66 rated for weatherproof outdoor use and lockable. 

• IP66 Waterproof protection
• Light grey back and black hinged lid
• Dimensions: 173mm wide x 163mm high x 90mm deep
• Lockable and hinged cover
• 8 knockouts and 1 cut-out entry option on rear
• Double pole switching for extra safety
• Compliant to BS 1363-2
• UV Resistant
• 10 Yr Warranty

13a 2 gang twin switched RCD socket that is ip66 rated for weatherproof outdoor use with lockable lid. It is passive latching residual current device so if the power fails, when it is restored it will be in the on position again.

• Passive latching
• IP66 Waterproof protection
• Light grey back and black hinged lid
• Dimensions: mm wide x mm high x mm deep
• Lockable and hinged cover
• 8 knockouts and 1 cut-out entry option on rear
• Double pole switching for extra safety
• Compliant to BS 1363-2
• UV Resistant
• 10 Yr Warranty

1 gang 2 way 20a weatherproof light switch that is ip66 rated for weatherproof outdoor use.

• IP66 protection
• Can switch 1 or 2 ways
• Comes complete with fixing caps
• Light grey
• Dimensions: mm wide x mm high x mm deep
• knockouts 
• Compliant to BS 60669-1
• UV Resistant wil not fade
• 10 Yr Warranty

2 gang 2 way 20a weatherproof light switch that is ip66 rated for weatherproof outdoor use.

• IP66 protection
• Both can switch 1 or 2 ways
• Comes complete with fixing caps
• Light grey
• Dimensions: mm wide x mm high x mm deep
• knockouts 
• Compliant to BS 60669-1
• UV Resistant wil not fade
• 10 Yr Warranty

Weatherproof external electrical connection box for protecting electric power outlets when used outdoors

• Ideal for using extension sockets, cable reels, timers and transformers outdoors.
• Domestic Uses : Garden water features, mowers, strimmer’s & hedge cutters, power washers, patio heaters & lighting
• Leisure uses : camping, outdoor activities, boating, fishing, power generators and battery charging
• IP55 Rated (silicone weather sea) with additional locking lugs, silicone moulds around the cable and silicone waterproof gasket
• Easy to use, lightweight, portable and fast to open and close.
• Totally DIY “Best New Product 2011” award
• Child safe
• Simple locking clamp – no screws needed
• 4 output channels for multiple connections

Outdoor power socket with Type A RCD (30mA) protection that can be seen through the transparent lid.

• Manufactured from robust, high impact grade polycarbonate for a long life.
• Black finish with a smoked black front casing for indicator visibility
• Height 159mm,Width 170mm,Projection 90mm
• RCD protected, double pole twin switch socket
• IP66
• IK06 Rated
• 230V
• Wider cable channels and casing will accommodate most plugs with thick over-moulded strain relief typically associated with outdoor products
• Multiple 20mm cable entries/exits allow for optimum positioning
• Outboard rockers
• Double pole switches
• Dual earth terminals

3 Gang Switched Converter Socket - Converts 1 or 2 Gang Sockets to 3 Gang

• Easy conversion of a single or double socket to a 3 gang switched socket
• 13 amp fused
• Dimensions : 200mm wide x 86mm high x 12mm deep(faceplate)
• Compliant with BS 1363

1 Gang to 2 Gang Switched Socket Converter

• Converts a single socket to a double socket
• Dimensions : 146mm wide x 86mm high x 20mm deep (faceplate)
• Supplied with M3.5 fixing screws and screw covers
• Compliant with BS1363
• White finish

Non Fused Round Pin Rewireable Plug Tops

• 15A round pin plug
• Available in Black or White (see above)

16A Plug-in Flow Connector 

• All-in-one junction box and connection system
• Versatile easy connection system for fixing wiring applications
• 250V, 16A plug-in connector
• 4 terminals for loop-in on male
• Large terminals with easy access
• Terminal screws supplied raised
• Easy lock and release mechanism
• Male: Max. 1.5mm² 3 core flex (c/w cable restraint)
• Female: Max. 3 x 2.5mm² flat twin & earth (with additional loop terminal)

Waterproof and Weatherproof Black Cable Connector

• IP68 Safety weatherproof cable connector
• For joining and repairing outdoor cables up to 3 core 1.5mm
• Can be submerged in water to depths of 20m for up to 30mins
• IP68 rated at 2 bar
• Maximum current : 16 Amps
• Maximum Voltage: 250v
• Minimum cable diameter : 5mm
• Maximum cable diameter : 9mm
• Dimensions : 37.5mm Wide x 115mm Long
• Suitable for round cable - 0.75mm2 - 1.5mm2

Standard Rewireable 3A UK Plug 

• Resilient (BS1363/A)
• Bar Grip
• Black
  
  

RCD Safety Plug

• Width 54mm,Projection 46mm
• IP20
• 13A 240V
• Re-wireable Plug Top
• Latching Type RCD
• RCD Trip current of 30mA
• RCD Trip speed of <40ms
• Certified to BS 1363, BS7071

Ideal for controlling hard to reach sockets, perfect replacement for old 7 day timers and much easier to program

• 230V, 16A (Max. Load 3680W)
• Control an appliance, like a table lamp, or cabinet lighting from your smartphone or tablet via the SmartKnight App 
• Set up a schedule using the timer function for things to switch on and off
• Fully compatible with Amazon Alexa or Google Assistant. 
• 2 year warranty
• Compact size
• Diameter 57mm, Projection 56mm
• IP20

Polar Bright White 10A 2 Way Ceiling Pull Cord Switch

• Can be operated in 1 or 2 way circuit
• Dimensions : 75.5mm diameter x 43.5mm (approx)

Chrome effect ceiling pull switch in polished or brushed satin.

• IP20 Suitable for bathrooms in correct zone
• Chrome effect finish
• 10A 220-240v 1 or 2 Way switching
• Earth terminal in the base,
• Surface mounting
• Minimum 1.5m cord length
• Matching cord knob
• Compliant to CE, BS EN 60669

Polar Bright White 10A 2 Way Ceiling Pull Cord Switch PRC210

• Can be operated in 1 or 2 way circuit
• Dimensions : 70mm diameter x 42mm 
• Complete with 5' (150cm) of pullstring

Polished Chrome 10A 2 Way Ceiling Pull Cord Switch PRC210-CV210CH

• Can be operated in 1 or 2 way circuit
• Dimensions : 70mm diameter x 42mm 
• Complete with 5' (150cm) of pullstring

Satin Chrome 10A 2 Way Ceiling Pull Cord Switch PRC210-CV210SC

• Can be operated in 1 or 2 way circuit
• Dimensions : 70mm diameter x 42mm 
• Complete with 5' (150cm) of pullstring

Polished Brass 10A 2 Way Ceiling Pull Cord Switch PRC210-CV210BR

• Can be operated in 1 or 2 way circuit
• Dimensions : 70mm diameter x 42mm 
• Complete with 5' (150cm) of pullstring

Polar Bright White 10AX 2 Way Ceiling Pull Switch with Anthracite Grey Cord and Bangle

• 10AX 2 way pullcord switch with anthracite grey bangle and cord
• Part M compliant
• Dimensions : 70mm diameter x 42mm (approx)
• Click here to see more in the Click Part M range

Polar Bright White 16A Double Pole Ceiling Pull Switch & Neon with Anthracite Grey Cord and Bangle

• 16A DP pullcord switch with neon and anthracite grey bangle and cord
• Part M compliant
• Dimensions : 70mm diameter x 42mm (approx)
• Click here to see more in the Click Part M range

Polar Bright White Square 50A Double Pole Ceiling Pull Switch with Neon and Mechanical On/Off Indicator

• 50A DP pullcord switch with neon and On/Off indicator
• Part M compliant
• Available with Anthracite Grey cord and bangle or Red cord and bangle (see above)
• Dimensions : 86mm x 86mm x 43mm (approx)
• Click here to see more in the Click Part M range

Matte black ceiling pull cord switch for bathroom 

• IP20 Suitable for bathrooms in correct zone
• 10A 220-240v 1 or 2 Way switching
• Earth terminal in the base,
• Surface mounting
• Minimum 1.5m cord length
• Matching cord knob
• Compliant to CE, BS EN 60669
• 74mm diameter of base and 36mm depth

Matte white ceiling pull cord switch for bathroom 

• IP20 Suitable for bathrooms in correct zone
• 10A 220-240v 1 or 2 Way switching
• Earth terminal in the base,
• Surface mounting
• Minimum 1.5m cord length
• Matching cord knob
• Compliant to CE, BS EN 60669
• 74mm diameter of base and 36mm depth

• IP20 Suitable for bathrooms in correct zone
• 10A 220-240v 1 or 2 Way switching
• Earth terminal in the base,
• Surface mounting
• Minimum 1.5m cord length
• Matching cord knob
• Compliant to CE, BS EN 60669
• 74mm diameter of base and 36mm depth

• IP20 Suitable for bathrooms in correct zone
• 10A 220-240v 1 or 2 Way switching
• Earth terminal in the base,
• Surface mounting
• Minimum 1.5m cord length
• Matching cord knob
• Compliant to CE, BS EN 60669
• 74mm diameter of base and 36mm depth

Rotary Isolator Switch - IP65 Rated for Indoor and Outdoor Use

• 4 Pole rotary isolator switch
• IP65 rated for interior or exterior use
• Interlocking lid ensures removal in "Off" position only
• Surface mounting with polycarbonate housing
• 20mm knockouts on switches upto 40A, 25mm knockouts on 63A/100A
• Manufactured to European Standards BS60947

Outdoor Photoelectric Cell Lighting Sensor for Exterior Lighting

• 1500W photocell
• Tough ABS construction
• 240v 50Hz 5a inductive load
• Calibrated to On @ 70 Lux, Off @ 210 Lux
• IP65 rated
• 3 year guarantee

Interior Passive Infra Red Motion Sensor

• Internal PIR with adjustable lux level 3-2000 Lux
• 6m radius range
• Time on adjustable 10 sec - 7 min (approx)
• 1200W incandescent load capacity
• 90mm Diameter x 38mm Deep
• IP20 rated
• BS EN 60730-2-7
• White finish

Micro IR Sensors Proximity Switch - PIR-SENTIM
Ideal for use inside kitchen units, bathrooms, plinths, wardrobes, cupboards and closets etc

• Detector will switch on the connnected lights when it senses motion of a body
• Switches off with adjustable time delay - 10 seconds to 3 minutes
• Up to 2.5m detection range
• Input and output wiring required
• Includes 1.5m cable to sensor head
• Not suitable for use outdoors
• Max load 250W (resistive)
• Sensor head is 25mm in diameter with a cut out of 20mm
• Switching Unit: 83mm length x 35mm width x 19mm height

Passive infra red movement detector for corner mounting on external walls, ideal for switching floodlights and security lighting incl LED

• 360 Degree detection range
• 12M max detection range 
• Time delay 10 seconds to 7 minutes
• Installation height 1.8 to 2.5m
• Polycarbonate body
• 3-2000 LUX ambient light level
• IP44 rated
• TUV CE ROHS compliant
• 3 Yr Warranty
• Max load Incandescent/Halogen: 1200W or LED: 300W
• Dims: 79mm High x 60mm Wide x 119mm Deep
• Also available in white

 white infa-red PIR recessed movement motion sensor

• 65 mm depth
• 360 Degree detection range 6M max detection distance
• 42mm Cutout
• 50 mm Overall Diameter 
• 50mm Recessed Depth
• 2000 LUX ambient light level
• For use in areas outside the zones only IP20 rated
• Time delay 3 seconds to 15 minutes

1000W Black Outdoor External PIR Motion Detector

• 1000W - 110°/12m range PIR sensor
• Maximum 12m range
• IP44 rated
• Adjustable duration time : 3±5 seconds to 4±1 minute
• Max 1000W incandescent or halogen / 300W fluorescent or low energy
• Lux control level : daylight and night adjustable

Alia IP44 adjustable passive infra red PIR movement detector for interior and exterior use that is LED compatible and corner mountable

• LED Compatible
• Ideal for switching security lighting, floodlights and amenity lights
• Can be corner or flush mounted
• Detection Range 180 degree
• Detection Distance Max: 12m Adjustable
• Time Delay 10 sec to 7 mins
• Manual overide
• Ambient Light 3-2000LUX
• Installation Height 1.8 - 2.5m
• Polycarbonate construction
• TUV CE Rohs
• Dimensions: 120mm High x 53mm Wide x 78mm Deep
• Also available in white
• 3yr Guarantee

Rated Load: Incandescent:1200w  LED:300w 

Passive infra red movement detector for corner mounting on external walls, ideal for switching floodlights and security lighting incl LED

• 360 Degree detection range
• 12M max detection range 
• Time delay 10 seconds to 7 minutes
• Installation height 1.8 to 2.5m
• Polycarbonate body
• 3-2000 LUX ambient light level
• IP44 rated
• TUV CE ROHS compliant
• 3 Yr Warranty
• Max load Incandescent/Halogen: 1200W or LED: 300W
• Dims: 79mm High x 60mm Wide x 119mm Deep
• Also available in black

IP20 Surface Mounted Motion Movement Detector for Ceiling Mounting

• Ideal for switching lighting automatically on and off when entering or exiting the room or area. 
• Detection Range 360 degree
• Detection Distance Max: 20m Adjustable
• Adjustable Time Delay 10 secs to 30 mins
• Ambient Light 3-2000LUX
• Polycarbonate
• TUV CE Rohs
• Dimensions: 102mm x 102mm x 53mm Deep
• Also available recessed
• 3 Yr Warranty

Rated Load:1200w 
LED Load:500w 

Adjustable Electronic Photocell Kit with Timer

• Compact surface mounting photocell
• Dusk switch on light level : 3 - 500Lux
• 30 seconds switching delay
• Load Capacities: 1000W resistive, 500W inductive, 400w LED
• Less than 1.8W consumption
• Working Temperature: -20 to +40
• Working Humidity: <93% RH
• Built In Timer: 1,2,3,4,5,6,7,8,9 Hours
• IP44 rated
• Dims: 110mm High x 70mm Wide x 35mm Deep
• 3 Yr warranty

This sensor is ideal where two way switching is required with pir movement sensors, top and bottom of stairs / each side of a room or corridor etc. Sensor can be paired wirelessly with another sensor. As one triggers it will automatically trigger other paired sensor.

IMPORTANT: YOU WILL NEED TO PURCHASE 2 OF THESE UNITS FOR 2 WAY SWITCHING

• Detector can be paired to another up to 15m away and will switch on the connected lights when it senses motion of a body
• Switches off with adjustable time delay - 10 seconds to 3 minutes
• Upto 2.5m detection range
• Input and output wiring required
• Includes 1.5m cable to sensor head
• Not suitable for use outdoors
• Max load 250W (resistive)
• Cut out for sensor head 20mm
• Switching Unit: 83mm length x 35mm width x 19mm height

Professional stand-alone PIR unit to suit a variety of installation requirements

• IP55 rated
• 200° field of detection
• 12m range @ 2.4m installation height
• Adjustable head unit for optimum positioning
• Easy to install – wire to the rear mounting plate then simply click the PIR unit into the mounting plate
• Versatile mounting options including wall, ceiling or corner mounting
• Automatic operation with a manual override option
• Adjustable Lux
• Adjustable time : 3 seconds to 30 minutes
• Switching capacity: Max. 2000W Incandescent / Max. 225W LED

Professional stand-alone PIR unit to suit a variety of installation requirements

• IP55 rated
• 200° field of detection
• 12m range @ 2.4m installation height
• Adjustable head unit for optimum positioning
• Easy to install – wire to the rear mounting plate then simply click the PIR unit into the mounting plate
• Versatile mounting options including wall, ceiling or corner mounting
• Automatic operation with a manual override option
• Adjustable Lux
• Adjustable time : 3 seconds to 30 minutes
• Switching capacity: Max. 2000W Incandescent / Max. 225W LED