Luce Square Stainless Steel LED Plinth Light Kit

Part No: SE15090C0

Colour temperature 4000k

Part No: SE15090W0

Colour temperature 3000k

Part No: SE2015000

Simple plug and play movement sensor that will switch the plinth lights on/off when you walk in the room. 

For more details click here



Luce SLS LED stainless steel 50mm square kitchen plinth light kit with driver has LED's in the top so when you look at the fitting it is lit and emits light gently forward and down on to the floor without causing glare.

  • This Stainless steel surround provides a high quality finish
  • The fitting has 3 concealed LED's integrated into the top edge to create a diffused light effect with no visible LED points
  • 4 fittings supplied in the pack along with the LED driver, ready to connect directly to the mains supply, 8 pack also includes the LED driver
  • Energy effiecient product, each fitting runs at only 0.6W
  • Light sits flush to the plinth for a sleek and stylish look
  • Fittings daisy chain together for simple installation
  • Suited to both contemporary and modern kitchens as you can choose from both cool and warm white LED
  • 4 and 8 pack comes with a 6w driver run a maximum of 10 fittings per driver
  • 12.5 year lamp life
  • Colour temperatures - cool white 4000k, warm white 3000k
  • 130 degree beam angle
  • 1.5M cable length to driver
  • Each fitting has 2m and 0.5m cables allowing around 2.4m distance between each one allowing you to daisy chain
  • Cut out size 44mm (this is a circular hole of 44mm)
  • Dimensions - 50mm height x 50mm width x 8.8mm depth


Bulb IncludedYes
Bulb TypeLED
Overall Width50mm

This website uses 'cookies' to give you the best, most relevant experience. Using this website means you’re Ok with this. You can change which cookies are set at any time - and find out more about them - by following this link (or by clicking the cookie link at the top of any page).

OK, I understand and accept