Astra 247/
My Shopping Basket
Empty View Basket
Call us now in the UK
0161 797 3222

Slimline Satin Chrome Empty LED Dimmer

Slimline Satin Chrome Empty LED Dimmer - 2 Gang
Showing Slimline Satin Chrome Empty LED Dimmer - 2 Gang

1 Gang

Part No: DSL170

Empty Plate and Knob


2 Gang

Part No: DSL171

Empty plate and 2 knobs


3 Gang

Part No: DSL172

Empty plate and 3 knobs


4 Gang

Part No: DSL173

Empty plate and 4 knobs


3-100w LED Module

Part No: SN400M

Dims most types of LED loads


40-400w Standard Module

Part No: IN22W

Dims most tungsten incandescent loads


Dummy Module


Acts as a 1 or 2 way switch but does not dim


Intermediate Dummy Module

Part No: MPINT

Intermediate dummy module that DOES NOT dim. 

Product Reviews

Write a review
Slimline Satin Chrome Empty LED Dimmer

Build your own bespoke LED and standard Dimmer Plate Switch

  • Simply choose the plate and then select the dimming modules you require
  • If you would like it assembling please tell us configuration left to right in the comments box when checking out
  • Single plate dimensions: 86mm wide x 86mm high x 5mm deep
  • Double plate dimensions: 146mm wide x 86mm high x 5mm deep 
  • All switches can operate 1 or 2 way but you can only have 1 dimmer on any light fitting
  • If you have to 2 way switch a circuit only put a dimmer on one end, we also list a dummy dimmer which will facilitate this
  • Most dimmer plates will fit on a 25mm backbox but we always reccomend using a 35mm box so there is plenty of air
Part NumberDSL171

You may also like

Sorry, there are no related products for this item.

This website uses 'cookies' to give you the best, most relevant experience. Using this website means you’re Ok with this. You can change which cookies are set at any time - and find out more about them - by following this link (or by clicking the cookie link at the top of any page).

OK, I understand